Farm Equipment Swine Equipment For Sale In Fontana

Chore-Time Model 55/MF Tube Clamp

Commonly used when repairing/replacing M55 pvc tubing. Chore-Time Model 55 PVC Coupler. Glued into place with PVC cement. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available.

A painted bracket permits you to attach water pipe to wall or paneling. Stainless Steel U-bolt for easy adjustment of nipple height. Built tough to resist hog abuse.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Chore-Time Model 55 Single 30� Lower Boot Assembly. Does not include plastic upper transition boot.

Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615 Used on Flex Auger sysems from 160' - 250' in length.

Honeywell Gas Valve, NG Gas, for "K" series or later Pilot Light "Classic" heaters.

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. Chore-Time Model 55 Twin 30� Lower Boot Assembly. Does not include plastic upper transition boot.

Chore-Time Model 90 Direct Drive Control Unit, 1Phase

Chore-Time Model 90 Anchor & Bearing Assembly. Short anchor tube on this assembly allows for less restriction and more flow into the auger.

Chore-Time Gearhead Assembly 216 RPM used in Model 75, 90, HMC, 125, 108 & MF systems. Uses CT3249 Pinion Gear.

Control Valve Replacement for Pilot Light Heaters upto and including Series "J"

The ESU Electronic Temperature Controller is a thermostatic control device that allows you to select and maintain the ideal temperature for all pets and livestock. It also incorporates a unique safety shutoff protector.

Chore-Time Model HMC Model Parts Package. This Weldment will accept the HMC Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32611, CT32612, CT32616 & CT32618

Chore-Time Model 75 Mechanical Drop Feeder Control Unit. Used at the end of a Drop Feeding system to control the operation of the power unit.

Chore-Time Model 90/HMC 45� PVC Elbow

These double panels are perfect for large alleyways, pens and stand alone tasks such as marking and medicating. Designed to move animals with ease, Kane sorting boards are light weight yet extremely durable.

Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...

Chore-Time Model 90/HMC Tube Connector Only. Steel tube to Steel tube.

Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock. G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed.

High Limit Switch , 350-Deg, for "Classic" Pilot Light Models, includes Bracket

Chore-Time Single Manual Slide Assembly. Telescoping Drive Tube/Handle also available CT47638 Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots.

Chore-Time Model 75/HMC Driver Weldment Assembly. Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws.

Chore-Time Replacment Oil Seal (Output Shaft) for All Chore-Time Gearheads

All Models use the same tried & proven non-siphoning trouble free 393 valve. Trojan's Cast Iron Cup with powder coat finish "Super Stong". Stainless-Steel trip plate & housing. Big enough for sows, yet small enough for baby pigs.