Farm Equipment Swine Equipment For Sale In Eugene

Flame sensor with 40" lead for models AB200, AW230, AW325

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 90/HMC Tube Anchor Weldement.

Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL, CSA/US approved. Our new mat is 30% more efficient then fiberglass mats and 80% more efficient...

The Sensor plus also includes a built in heater to dissapate moisture around the sensor. This helps reduce the build up of dust and dirt on the sensor that can lead to false readings.

Replacement parts: Motor = CT4229, Pinion Gear = CT5046, Gearhead = CT32615 Used on Flex Auger sysems from 20' - 150' in length. Chore-Time Model 55 1/3 HP, 348 RPM, 60HZ-1PH 230V Power Unit.

Chore-Time Model 90/HMC PVC Coupler

Chore-Time Model 75 45� PVC Elbow

For use on the following power Units: CT325966, CT325982, and CT3259124 Chore-Time Model 108 1.5HP , 230V, 1-Phase Replacement Motor.

The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility. The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making...

For use on the following power Units: CT325949, CT325979 and CT3259123 Chore-Time Model 55/75/90/108 1HP, 230V, 1-Phase Replacement Motor.

Maximum moisture content = 27%. Delivery Rate = 220 lb./min. With standard 348 RPM power unit. Used to convey high moisture corn, large pellets, shelled corn or ground feed. Maximum particle size = 3/16" dia.

Over 30 years of field experience have shown this to be the Injector of choice for most producers. Dosatron's D128R, 7 Gallon, Flat Top Injector has withstood the test of time.

Honeywell Gas Valve, NG Gas, for "K" series or later Pilot Light "Classic" heaters.

Chore-Time Model HMC Direct Drive Control Unit, 1Phase

Honeywell Gas Valve, LP Gas, for "K" series or later Pilot Light "Classic" heaters.

Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. Does not include plastic upper transition boot. Chore-Time Model 55 Quad 30� Lower Boot Assembly.

Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems. Translucent feeder provides quick visual check of its contents.

This is the bearing assembly used on CT35343, CT35344 & CT35345 Anchor & Bearing Assemblies. Chore-Time Model 90/HMC Bearing Cap Assembly.

Used at the end of a Drop Feeding system to control the operation of the power unit. Chore-Time Model 55 Mechanical Drop Feeder Control Unit.

Control Valve Replacement for Pilot Light Heaters upto and including Series "J"

Use with Model 55/75/90 Outlets and CT1932 Drop Tube. Chore-Time Model 55/75/90/HMC Drop Tube Pin.

CT5046R Pinion has 21 teeth and a 1/2" diameter bore. Chore-Time Replacement Pinion Gear.

21" Thermocoupler "Snap In" for all LB White Pilot Light Heaters

They will cause the heat mat to overheat. 46 watts, NRTL, CSA/US approved. Provide the optimal climate for your animals with Kane's pet and livestock heat mats. Warning: heat radiating appliance for animals - always use a temperature control device -...

Chore-Time Model 90/HMC Plastic Drop Tube (3 3/4" x 12')

Includes hardware. Slide shut-off assembly used on Model 75/90 Twin Boots, two auger systems. Chore-Time Model 75/90 Twin Slide Assembly.

Telescoping Drive Tube/Handle also available CT47638 Rack and Pinion style Slide Shut-Off assembly for Twin (2) Auger Boots. Chore-Time Twin Manual Slide Assembly.