Farm Equipment Swine Equipment For Sale In Clarksville

Chore-Time Model 75 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.

Chore-Time Model 75 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. This Weldment will accept the M75 Tube.

Regulator, Single Stage (LP), Classic 60/346, Classic 115/ 377

Chore-Time Model 75/90 Twin Slide Assembly. Slide shut-off assembly used on Model 75/90 Twin Boots, two auger systems. Includes hardware.

Chore-Time Diaphragm Assembly for CT46051 Switch Assembly

Chore-Time Model 90/HMC Tube Connector w/Clamps

Chore-Time Model 108 45D PVC Elbow

Chore-Time Model 108 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

Chore-Time Model HMC Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. This Weldment will accept the HMC Tube.

Chore-Time Model 75/90/HMC 1/2HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Used on M75 Flex Auger sysems from 20' - 80' in length, M90 & HMC Flex Auger sysems from 20' - 30' in length. Replacement parts: Motor = CT5050, Pinion Gear = CT5046, Gearhead = CT32617

Chore-Time Model 108 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. This Weldment will accept the M108 Tube.

Chore-Time Model 55 1/3 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Used on Flex Auger sysems from 20' - 150' in length. Replacement parts: Motor = CT4229, Pinion Gear = CT5046, Gearhead = CT32615

Chore-Time Replacement Pinion Gear. CT5046R Pinion has 21 teeth and a 1/2" diameter bore.

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

Quantity needed is determined by the size and length of the auger system. Chore-Time Model 75/90/HMC /108 Suspension Kit. Used to suspend the Flex Auger from the ceiling. Each kit includes 25 "S" Hooks, 12 Screw Hooks and 25' of double loop chain.

Chore-Time Model 55 Mechanical Drop Feeder Control Unit. Used at the end of a Drop Feeding system to control the operation of the power unit.

Chore-Time Model 55 Flex Auger. With standard 348 RPM power unit. I.D. = .89" O.D. = 1.52" Used to convey mash, crumbles or small pellet feeds. Maximum particle size = 5/32" dia. Delivery Rate = 15 lb./min.

Koehn 1/2" x 48" Original Grip Rattle Paddle with BB's inside to help animals move along alleyways. The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making the Rattle Paddle more durable for...

Chore-Time DPST Toggle Switch-4 Prong. This is the toggle switch that is located on the control unit (220v, single phase). Used on Flex Auger models 55/75/90/HMC Older Style Metal Control Unit (Part Numbers 6500-).

Chore-Time Model 108 Direct Drive Control Unit, 1Phase

Chore-Time Model 90 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

A painted bracket permits you to attach water pipe to wall or paneling. Built tough to resist hog abuse. Stainless Steel U-bolt for easy adjustment of nipple height.

Supply Hose, LP Gas, 1/4" X 10', for Classic 60/346, (20543)

Chore-Time Model 55 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. This Weldment will accept the M55 Tube.

Trojan's Cast Aluminum Cup featuring the 290 Gravity Valve. Uses the Tip Plate Assembly. Great for use on tank or barrel installations.

Chore-Time Model 55/75/MF "Y" Outlet. Used under a drop to "Y" or split the feed from one drop tube in to 2 drop tubes.

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32611, CT32612, CT32616 & CT32618