Farm Equipment Swine Equipment For Sale In Cary

Chore-Time Replacment Oil Seal (Output Shaft) for All Chore-Time Gearheads

Chore-Time Micro switch for Hopper Level Control.

The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility. The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making...

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 55 Tube Anchor.

Also used on Model 108 Anchor & Bearing Assembly Chore-Time Flex Auger Clamp for Model 75/90/HMC Driver Weldment at Control Unit.

All "Ag " heaters Gas Cock Valve, Manual Shut Off with 1/2" pipe nipple.

Chore-Time Model 75 Tube Clamp (PVCI)

For a complete lower boot use part number CT36389 or CT 36390 This is the lower boot body only. Chore-Time Model 75 Twin Auger Boot Weldment Only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

Flame sensor with 40" lead for models AB200, AW230, AW325

Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot at a 30� angle. Chore-Time Model 108 Single 30� Lower Boot Assembly.

Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M90 auger exiting the boot at a 30� angle. Chore-Time Model 90 Single 30� Lower Boot Assembly.

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 90/HMC Tube Anchor Weldement.

G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed. This feeder is easy to fill, made of 20 ga. Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising...

Chore-Time Model 55 PVC 45� Elbow

Our new mat is 30% more efficient then fiberglass mats and 80% more efficient than heat lamps. Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL,...

This kit made to mount the Trojan water swing includes 6 feet of chain, 2 S-Hooks, 1 Screw Hook and 2 - A7900 Trojan Model 2000 Wrench Curve Nipples.

Chore-Time Multiflo Auger Connectors (2 per pkg)

Honeywell Gas Valve, NG Gas, for "K" series or later Pilot Light "Classic" heaters.

LP Gas Orfice, Burner, for Classic 60/ 346 heaters

Chore-Time Model 75 PVC Coupler

Must use CT6381 Drop Tube with this Flex-Joint Ring. Chore-Time Model 55/75 Flex-Joint Ring.

Chore-Time Model 108 Plastic Drop Tube (5" x 12')

Translucent feeder provides quick visual check of its contents. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg). Chore-Time Model 55 Clear Drop Feeder Assembly.

Does not include plastic upper transition boot. This is a complete Lower Boot that will accommodate a Single HMC auger exiting the boot at a 30� angle. Chore-Time Model HMC Single Lower Boot Assembly.

Glued into place with PVC cement. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available. Chore-Time Model 55 PVC Coupler. Commonly used when repairing/replacing M55 pvc tubing.

Chore-Time Model 108 Direct Drive Control Unit, 1Phase

Our new mat is 30% more efficient then fiberglass mats and 80% more efficient than heat lamps. Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL,...