Farm Equipment Swine Equipment For Sale In Baltimore

Warning: heat radiating appliance for animals - always use a temperature control device - do not cover Kane heat mats with any articles or materials. Perfect for outdoor pens, kennels, garages, dog houses, whelping areas, veterinary clinics, and barns.

Chore-Time Model 75 Tube Clamp (PVCI)

Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg).

Chore-Time Model 108 Tube Connector w/Clamps

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. This is the lower boot body only. Chore-Time Model 55 Single Auger Boot Weldment Only.

Chore-Time Model 55 Direct Drive Control Unit, 1 Phase

Chore-Time Model 75 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. This Weldment will accept the M75 Tube.

Pilot Light shield for Classic 115/377/379

Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Used on Flex Auger sysems from 160' - 250' in length. Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615

Chore-Time Model 75/HMC Driver Weldment Assembly. Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws.

Chore-Time Gearhead Assembly 348 RPM used in Model 75, 90, HMC, 125, & 108 systems. Uses CT6104 Pinion Gear with 1/2 HP and 3/4 HP motors and CT5046 with 1 HP motors.

Honeywell Gas Valve, LP Gas, for "K" series or later Pilot Light "Classic" heaters.

Motor, Totally Enclosed with Sleeve Bearing, 1/15 HP, Classic 60/346/348

NG Orfice, Burner, for Classic 170/410

The Sensor plus also includes a built in heater to dissapate moisture around the sensor. The Sensor Plus Drop Tube Switch has a built in safety timer that allows the operator to set a Maximum Run Time for the auger to ensure that it will not continue...

Chore-Time Model 75 Direct Drive Control Unit, 1Phase

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 1 hole hog feeder.

Chore-Time Boot Bearing Assembly. Used on Chore-Time M75 Auger Boots prior to 1996 and M125 Boots

Chore-Time Model 108 5" Clamp

Chore-Time Model 55 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

Pilot Light Sheild, used in Classic 60K, 346 and 348 heaters.

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

Chore-Time Model 90/HMC Bearing Cap Assembly. This is the bearing assembly used on CT35343, CT35344 & CT35345 Anchor & Bearing Assemblies.

Maximum moisture content = 27%. Chore-Time Model 108 Flex Auger. Delivery Rate = 220 lb./min. Used to convey high moisture corn, large pellets, shelled corn or ground feed. Maximum particle size = 3/16" dia.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accommodate a Single HMC auger exiting the boot at a 30� angle.

Koehn 1/2" x 48" Original Grip Rattle Paddle with BB's inside to help animals move along alleyways. The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making the Rattle Paddle more durable for...

Prevent water lines from freezing. Works well on plastic or metal pipes in cold weather. 100W, 110v heating element installs on any pipe, plastic or metal, in less that one minute using the two springs attached to the Pip-N-Hot unit.