Chore-Time Model 75 Single Straight-Out Lower Boot Assembly. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Does not include plastic upper transition boot.
Chore-Time Model 55 PVC Coupler. Commonly used when repairing/replacing M55 pvc tubing. Glued into place with PVC cement. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available.
The valve body and trigger are stainless steel, with built-in playguard protecting trigger action. Even the smallest pgis like the easy bite trigger and tapered end on the Spiglet.
Chore-Time Model 90 Single 30� Lower Boot Assembly. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Does not include plastic upper transition boot.
Trojan's Cast Aluminum with baked on powder coat finish. All Models use the same tried & proven non-siphoning trouble free 393 valve. Stainless-Steel trip plate & housing. Big enough for sows, yet small enough for baby pigs.
Dial-A-Temp plugs right into your outlet to provide a quick and easy way to regulate temperature. Just plug your heat mat into the bottom of the control and create a warm, dry environment for your small animals.
Replacement parts: Motor = CT8782, Pinion Gear = CT6104, Gearhead = CT32617 Used on M108 Flex Auger Systems from 110' - 150' in length. Chore-Time Model 108 1.5HP, 348 RPM, 230v, 60HZ, 1PH Power Unit.
This Weldment will accept the M108 Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model 108 Model Parts Package.
Used on Flex Auger models 55/75/90/HMC This is the toggle switch that is located on the CT46051 Switch & Plate Assembly that comes with the New Style 46800- Control Units. Chore-Time Toggle Switch - 4 Prong.
Chore-Time Model 75 Single 30� Lower Boot Assembly. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Does not include plastic upper transition boot.
Used on Flex Auger models 55/75/90/HMC Older Style Metal Control Unit (Part Numbers 6500-). This is the toggle switch that is located on the control unit (220v, single phase). Chore-Time DPST Toggle Switch-4 Prong.
Maximum particle size = 5/32" dia. Used to convey mash, crumbles or small pellet feeds. Chore-Time Model 75/HMC Flex Auger. I.D. = 1.44" O.D. = 2.38" Maximum moisture content = 18%.
Chore-Time Model 75 Single Auger Boot Weldment Only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. For a complete lower boot use part number CT36442 or CT 36589
