Farm Equipment Swine Equipment For Sale In Arlington

Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. Chore-Time Model 55 Quad 30� Lower Boot Assembly. This is a complete Lower Boot that will accomodate a Four M55 augers exiting the boot at a 30� angle.

These double panels are perfect for large alleyways, pens and stand alone tasks such as marking and medicating. Designed to move animals with ease, Kane sorting boards are light weight yet extremely durable.

LP Gas Orfice, Burner, for Classic 60/ 346 heaters

Chore-Time Model 55 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.

Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems. Chore-Time Model 55 Clear Drop Feeder Assembly. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10...

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. Chore-Time Model 75 Single Auger Boot Weldment Only. This is the lower boot body only.

Stainless Steel U-bolt for easy adjustment of nipple height. A painted bracket permits you to attach water pipe to wall or paneling. Built tough to resist hog abuse.

All Models use the same tried & proven non-siphoning trouble free 393 valve. Trojan's Cast Aluminum with baked on powder coat finish. Big enough for sows, yet small enough for baby pigs.

Valve, Gas control, (LP Gas), 11" W.C., use in AW215CH, AW230EH, FH; All Guardian Models

Chore-Time Model 90/HMC Plastic Drop Tube (3 3/4" x 12')

It runs on LP or convert to natural gas, developing 4050 BTU per hour. An efficient way to revent freezing. Mount this unit under livestock waterers. An adjustable automatic thermostat permits you to control the temperature for whatever the condition.

Chore-Time Model HMC Direct Drive Control Unit, 1Phase

Chore-Time Model 90/HMC/108 Drop Tube Pin. Use with Model 90/ HMC/108 Outlets and CT6381 Drop Tube.

Chore-Time Multiflo Auger Connectors (2 per pkg)

Pilot Light Sheild, used in Classic 60K, 346 and 348 heaters.

Commonly used when repairing/replacing M55 pvc tubing. Chore-Time Model 55 PVC Coupler. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available.

NG Orfice, Burner, for Classic 115/379

Chore-Time Model 55 Tube Clamp. This clamp is to be used to clamp the pvc tube to the control unit assembly.

Chore-Time Model 90 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

Chore-Time Model 75 Tube Clamp (Steel)

Chore-Time Replacement Pinion Gear. CT5046R Pinion has 21 teeth and a 1/2" diameter bore.

Replacement parts: Motor = CT5050, Pinion Gear = CT5046, Gearhead = CT32617 Chore-Time Model 75/90/HMC 1/2HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Used on M75 Flex Auger sysems from 20' - 80' in length, M90 & HMC Flex Auger sysems from 20' - 30' in length.

LP Orfice, Burner, for Classic 170/408

Chore-Time Model 55/75/90/HMC Drop Tube Pin. Use with Model 55/75/90 Outlets and CT1932 Drop Tube.

Chore-Time 5/8" Shaft Collar. Used on Model 75/90/HMC/108 anchor & bearing assemblies.

Chore-Time Hopper Level Control for single phase power units. Mounts in the last feeder and will turn ssytem on and off depending on the level of feed in the last feeder.

Chore-Time Model 90/HMC Tube Connector Only. Steel tube to Steel tube.