Farm Equipment Swine Equipment For Sale In Anchorage

Chore-Time Nylon Pulley Assembly

LP Orfice, Burner, for Classic 170/408

Our new mat is 30% more efficient then fiberglass mats and 80% more efficient than heat lamps. Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL,...

Chore-Time Multiflo Flex Auger. I.D. = .89" O.D. = 1.52" Maximum particle size = 3/16" dia. Delivery Rate = 15 lb./min. Maximum moisture content = 18%. Used to convey mash, crumbles or small pellets.

Over 30 years of field experience have shown this to be the Injector of choice for most producers. Dosatron's D128R, 7 Gallon, Flat Top Injector has withstood the test of time.

Auger slips over tube and uses CT7703 Auger Clamp/ Chore-Time Model 75/HMC Driver Weldment Only.

Chore-Time Model 55 Direct Drive Control Unit, 1 Phase

Chore-Time Model 108 Tube Connector Only

Used on M75 Flex Auger sysems from 160' - 200' in length, M90 & HMC Flex Auger sysems from 100' - 50' in length and M108 Flex Auger Systems from 60' - 100' in length. Replacement parts: Motor = CT6857, Pinion Gear = CT6104, Gearhead = CT32617

Flame sensor for Model AW075

Ideal for farrowing stalls, creep areas and nurseries. A domed stainless steel screen keeps foreign matter out. Adjusts to 3 water flow rates & features a screen filter that keeps foreign matter out of the valve.

Chore-Time Model 75 PVC Coupler

For use on the following power Units: CT325950, CT325951 and CT325977 Chore-Time Model 75/90/HMC 1/2HP, 230V, 1-Phase Replacement Motor.

The state of the art controller will maintain any pre-selected temperature between 68 degrees F and 95 degrees F (20 degrees C and 35 degrees C). It also incorporates a unique safety shutoff protector.

Rack and Pinion style Slide Shut-Off assembly for Twin (2) Auger Boots. Telescoping Drive Tube/Handle also available CT47638 Chore-Time Twin Manual Slide Assembly.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot horizontal to the ground.

Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. This Weldment will accept the M75 Tube. Chore-Time Model 75 Model Parts Package.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot at a 30� angle.

The Sensor plus also includes a built in heater to dissapate moisture around the sensor. The Sensor Plus Drop Tube Switch has a built in safety timer that allows the operator to set a Maximum Run Time for the auger to ensure that it will not continue...

Used under a drop to "Y" or split the feed from one drop tube in to 2 drop tubes. Chore-Time Model 55/75/MF "Y" Outlet.

This clamp is to be used to clamp the pvc tube to the control unit assembly. Chore-Time Model 55 Tube Clamp.

Just plug your heat mat into the bottom of the control and create a warm, dry environment for your small animals. Perfect for barns, kennels, garages and whelping areas. Dial-A-Temp plugs right into your outlet to provide a quick and easy way to regulate...

Our new mat is 30% more efficient then fiberglass mats and 80% more efficient than heat lamps. Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL,...

Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots. Telescoping Drive Tube/Handle also available CT47638 Chore-Time Single Manual Slide Assembly.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate a Single M90 auger exiting the boot horizontal to the ground.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate a Single M90 auger exiting the boot at a 30� angle.

This is the toggle switch that is located on the CT46051 Switch & Plate Assembly that comes with the New Style 46800- Control Units. Used on Flex Auger models 55/75/90/HMC Chore-Time Toggle Switch - 4 Prong.