Farm Equipment Swine Equipment For Sale In Anaheim

Precision machined tapered threads create a water-tight union. Product Features: Turns any bucket, barrel or even PVC pipe into a waterer Portable watering solution for travel and shows Connects quickly and easily Gravity flow water system kit includes...

This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot horizontal to the ground. Chore-Time Model 108 Single Straight-Out Lower Boot Assembly Only.

This coupler is used to connect two pieces of M55 tubing together when there is no bell end available. Chore-Time Model 55 PVC Coupler. Commonly used when repairing/replacing M55 pvc tubing.

Chore-Time Model 90/HMC 45� PVC Elbow

Chore-Time Model 75 Tube Connector w/Clamps

Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...

Chore-Time Model 75/HMC Driver Weldment Assembly. Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws.

Pilot Light Sheild, used in Classic 60K, 346 and 348 heaters.

Includes hardware. Slide shut-off assembly used on Model 75/90 Twin Boots, two auger systems. Chore-Time Model 75/90 Twin Slide Assembly.

This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot at a 30� angle. Chore-Time Model 108 Single 30� Lower Boot Assembly. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.

Chore-Time Model 108 Anchor & Bearing Assembly. Short anchor tube on this assembly allows for less restriction and more flow into the auger.

Maximum particle size = 3/16" dia. Maximum moisture content = 18%. Used to convey mash, crumbles or small pellet feeds. With standard 348 RPM power unit. Delivery Rate = 100 lb./min.

Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7 Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90' in length and M108 Flex Auger Systems from 20' - 50' in length.

Big enough for sows, yet small enough for baby pigs. Trojan's Cast Iron Cup with powder coat finish "Super Stong". All Models use the same tried & proven non-siphoning trouble free 393 valve.

21" Thermocoupler "Snap In" for all LB White Pilot Light Heaters

Chore-Time Diaphragm Assembly for CT46051 Switch Assembly

Chore-Time Model 55 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.

This is a complete Lower Boot that will accomodate a Single M90 auger exiting the boot horizontal to the ground. Chore-Time Model 90 Single Straight-Out Lower Boot Assembly. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access...

Chore-Time Model 55 PVC 45� Elbow

Chore-Time Model 108 1.5HP , 230V, 1-Phase Replacement Motor. For use on the following power Units: CT325966, CT325982, and CT3259124

Supply Hose, LP Gas, 1/4" X 10', for Classic 60/346, (20543)

This Weldment will accept the M90 Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model 90 Model Parts Package.

Chore-Time Model 90 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

Height is 36 1/2". The control and burner assembly removes easily for service through the hinged cover. Theromostat & controls may be removed easily for service. Includes LP Hook up.

Fan Wheel, 6-1/2" Diameter X 3-1/8 , used in Classic 60K , 346, and 348 heaters

Chore-Time Model 108 5" Clamp

Chore-Time Model 75 Drop Kit with Clamps. Clamps hold the Drop in place.