Chore-Time Model 55 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. This Weldment will accept the M55 Tube.
Mount this unit under livestock waterers. It runs on LP or convert to natural gas, developing 4050 BTU per hour. An adjustable automatic thermostat permits you to control the temperature for whatever the condition.
This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. For a complete lower boot use part number CT36442 or CT 36589
This is a complete Lower Boot that will accommodate a Single HMC auger exiting the boot at a 30� angle. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.
Chore-Time Hopper Level Control for single phase power units. Mounts in the last feeder and will turn ssytem on and off depending on the level of feed in the last feeder.
Our Model 2000 Wrench Curve Nipple is standard & it's 45 degree angle keeps the pigs standing while drinking. It also features rounded edges to reduce bacteria & scum from building in corners.
Chore-Time Toggle Switch - 4 Prong. This is the toggle switch that is located on the CT46051 Switch & Plate Assembly that comes with the New Style 46800- Control Units. Used on Flex Auger models 55/75/90/HMC
Chore-Time Model 75/HMC Flex Auger. Maximum particle size = 5/32" dia. I.D. = 1.44" O.D. = 2.38" Used to convey mash, crumbles or small pellet feeds. Delivery Rate = 50 lb./min. With standard 348 RPM power unit.
This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. For a complete lower boot use part number CT9313
Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock. This feeder is easy to fill, made of 20 ga. G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately...
Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg). Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems.
