Farm Equipment Swine Equipment For Sale In Albuquerque

Chore-Time Model 90/HMC Bearing Cap Assembly. This is the bearing assembly used on CT35343, CT35344 & CT35345 Anchor & Bearing Assemblies.

Chore-Time Model 75 Tube Clamp (Steel)

Chore-Time Model 90 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

Chore-Time Model 90/HMC Plastic Drop Tube (3 3/4" x 12')

Control, Hot Surface Ignition

Chore-Time Model HMC Direct Drive Control Unit, 1Phase

This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot at a 30� angle. Chore-Time Model 108 Single 30� Lower Boot Assembly. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.

NG Orfice, Burner, for Classic 170/410

Chore-Time Model 75 45� PVC Elbow

Used on Flex Auger models 55/75/90/HMC Older Style Metal Control Unit (Part Numbers 6500-). This is the toggle switch that is located on the control unit (220v, single phase). Chore-Time DPST Toggle Switch-4 Prong.

Chore-Time Replacment Oil Seal (Output Shaft) for All Chore-Time Gearheads

Maximum particle size = 5/32" dia. Chore-Time Model 55 Flex Auger. Delivery Rate = 15 lb./min. Used to convey mash, crumbles or small pellet feeds. Maximum moisture content = 18%. With standard 348 RPM power unit.

Big enough for sows, yet small enough for baby pigs. Trojan's Cast Aluminum with baked on powder coat finish. All Models use the same tried & proven non-siphoning trouble free 393 valve.

Chore-Time Model 55 Direct Drive Control Unit, 1 Phase

Chore-Time Model 75 Tube Connector Only (steel conn/PVC pipe)

Chore-Time Model 90/HMC/108 Drop Tube Pin. Use with Model 90/ HMC/108 Outlets and CT6381 Drop Tube.

Rounded hand grips on the top and side make for easy handling. Designed to move animals with ease, Kane sorting boards are light weight yet extremely durable. These double panels are perfect for large alleyways, pens and stand alone tasks such as marking...

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

Designed for use with pigs 50 lbs or more. Adjustable to 3 water flow rates. The Trojan long lasting non-corrosive 304 Stainless Steel body & trigger. Outstanding finisher nipple. 360 degree Wrench access, exclusivley a Trojan Patented feature, which...

It also incorporates a unique safety shutoff protector. The state of the art controller will maintain any pre-selected temperature between 68 degrees F and 95 degrees F (20 degrees C and 35 degrees C).

Replacement parts: Motor = CT6857, Pinion Gear = CT6104, Gearhead = CT32617 Used on M75 Flex Auger sysems from 160' - 200' in length, M90 & HMC Flex Auger sysems from 100' - 50' in length and M108 Flex Auger Systems from 60' - 100' in length.

Chore-Time Model 75/HMC Driver Weldment Assembly. Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws.

Chore-Time Boot Bearing Assembly. Used on Chore-Time M75 Auger Boots prior to 1996 and M125 Boots

Chore-Time Model 55 PVC Tubing. Each Tube is 10' long.

Gas Cock Valve, Manual Shut Off with 1/2" pipe nipple. All "Ag " heaters

Used on Flex Auger models 55/75/90/HMC This is the toggle switch that is located on the CT46051 Switch & Plate Assembly that comes with the New Style 46800- Control Units. Chore-Time Toggle Switch - 4 Prong.

Chore-Time Model HMC Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.