Farm Equipment Livestock Waterers For Sale In Warren

SAFE IN PLASTIC. Designed to fit into narrow opening in any hog waterer resevoir. Thermostatically controlled to only run when necessary. Unit measures 7" in diameter, 110v, 1000 Watts.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

Greater tolerance to operation in dirty conditions; 4. Another plus is the VP2 is more compact than VP1 so it works very well in most of our waterer models - MH, MJ, MK, MC, WPO12, WPO17 as well as other energy-free drinkers.

Robert's Brass 3/8" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. This model features an adjustable short arm for customizing water level.

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

Very efficient use of energy. Meets "Grade A" Dairy requirements (non-siphoning). 22" W x 27" L x 26" H 7 gal. Engineered with the farmer in mind, this waterer allows easy access to submersible heater, water line, incoming services and provides effortless...

Jug Thermostat fits Models 101, 202, 303 & 404 with heat.

This white pin holds the upper arm to the top base.

37 1/4"L x 28" W x 12 3/4" H 11 # 5 year warranty If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

Connects valve to 301 round float A brass rod float arm 1/4" x 1 1/2" with threads on each end.

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

Inside repair kit for Topaz & Megaflow Valve.

It moves the upper arm and is also held by thumbscrew to the float arm. The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin.

#9 on breakdown. Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line.

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

The larger tanks come with 1.25� drains installed. Available in Aqua Blue color only. 43 3/4" x 28 3/4" x 23" Comes with 1.25" drain installed. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded...

It will turn on the heating element at 45 degrees Fahrenheit and off at 60 degrees to provide reliable freeze protection with the waterers. Unlike the original concept of the submerged bulb to sense water temperature, this unit senses the air temperature...

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

-Minimal Assembly -Strong Utra-violet Light Protection to prevent Fading/Cracking -One Inch (2.54 cm) Drain Plug (Drain is to the left as you face drinker) -Drinker Opening is: 14.0"(35.6 cm )W 16.5"(41.9 cm) H 12.0"(30.5 cm) D

O'Ring only replacement for Frost Pro Accessory.

51 1/2" L x 27 1/2" W x 13" H 19# 5 year warranty If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

This piece is held by two thumbscrews not included in this part. 6 1/2" orange arm that fits between the lower arm and the float connect.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...