Farm Equipment Livestock Waterers For Sale In Sunnyvale

This diaphragm fits all Jug Model Valves.

Pride of the Farm Element for electric waterer units.

It is a split plastic coupler that fits into the corrugation of the Earth Tube. Used for joining multiple Earth Tubes.

Valve 36" Float Cord Only.

They mount above or below the water and give flows of up to 6 gallons per minute. FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy servicing Flow stops when unscrewed for servicing Supplied with back-nut and seal washer Built...

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

Use this valve assembly with the J303 with without heat.

SPI 351/352 New Generation Gasket.

It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown. Pride of the Farm 1/4" Orifice on a VP124 Valve.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. This model features an adjustable short arm for customizing water level. Robert's Brass 3/8" orifice Valve complete with plunger and arms.

SPI 351/352 (old style) Rubber Drain Plug only .

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness...

Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch...

#10 on breakdown. Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

1000 Watt Immersible element used in the PC2 or PC10 waterer.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown. Pride of the Farm 5/32" Orifice on a VP124 Valve.

Pride of the Farm Element for electric waterer units.

Turns on at 36 degrees and turns off at 48 degrees. Often used in Franklin & Arkfeld waterers. Surface mount thermostat used in galvanized waterers.