Farm Equipment Livestock Waterers For Sale In Sterling Heights

SPI 351/352 New Generation Gasket.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Thermostatically controlled to only run when necessary. Unit measures 7" in diameter, 110v, 1000 Watts. SAFE IN PLASTIC. Designed to fit into narrow opening in any hog waterer resevoir.

Has many uses around the home & farm. Works automatically to ambient temperature. Saves money by using power only when temperatures require. Operates with any 15 amp 120V electric heater or fan.

A brass rod float arm 1/4" x 4" with threads on each end. Connect valve to 301 round float.

Used for joining multiple Earth Tubes. It is a split plastic coupler that fits into the corrugation of the Earth Tube.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

SPI 90 degree elbow for all models.

A brass rod float arm 1/4" x 5" with threads on each end. Connects valve to 301 round float.

It will take abuse! Won't rust, resists rot & hold up to chemically active soil conditions. Unaffected by ground movement due to freezing & thawing. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

A brass rod float arm 1/4" x 6" with threads on each end. Connects valve to 301 round float.

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

40 1/2" x 28 1/4" x 14 1/4" If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole.

SPI 3.75" Brass Short Float Stem only.

Foam insulation between walls has an R-value of 7.14". Tolerance to water level - you don't have to worry about summer & winter water levels. No heat well needed; use an 8-12" tile; can be fitted on most existing pads.

A brass rod float arm 1/4" x 2" with threads on each end. Connects valve to 301 round float.

Apex replacement float with string included.

A brass rod float arm 1/4" x 7" with threads on each end. Connects valve to 301 round float.

Float Arm for the Mira Fount M3330 waterer.

Replacement Plastic Valve & Float f/ WFD85 and MFD85 field drinkers.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

The quality construction and very precise control ensures the most economical usage of water and the least amuont of labor in preventing waterer ice formation for many years. No more-no less.