Farm Equipment Livestock Waterers For Sale In Stamford

Guaranteed for 1 year & SAFE IN PLASTIC. Thermostatically controlled to only run when necessary. This donut shaped 500 Watt De-Icer is designed for multiple uses around the farm. Constructed of Cast Aluminum for ultimate effiency & safety.

No other parts are included with this Power Link. Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm. #1 on breakdown.

1 per model EXCEPT 404 models need 2 kits. Weather seal Kit for Jug 101, 202 & 404 with or without heat.

-Minimal Assembly -Strong Utra-violet Light Protection to prevent Fading/Cracking -One Inch (2.54 cm) Drain Plug (Drain is to the left as you face drinker) -Drinker Opening is: 14.0"(35.6 cm )W 16.5"(41.9 cm) H 12.0"(30.5 cm) D

No inside working parts included. The orange male fitting end of the Franklin Valve.

SPI hatch cover for model 4x4 energy free waterer.

70 Gallon Open Trough Tank offers more features. Concrete stud lags included, High flow valve. You can drain through a 3 inch opening with a mechanical plug. Grade A compliant. There also is a 3 inch opening at the bottom of the tower which permits drainage...

1/2" orfice only for the inside of a Franklin Valve.

Connects valve to 301 round float. A brass rod float arm 1/4" x 5" with threads on each end.

The only drawback is that if the nozzle is attached, I cannot close the tail gate on my truck. It's designed to be positioned at the back or front of a fender well with convenient and easy access to water fill caps located on both sides.

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.

Robert's Brass cotter key that connects the long arm to the valve body.

Two large drink openings 8" x 14" each. Over 300 square inches of access for easy hook up. Molded with the most effective ultraviolet inhibitor. You do need proper installation to prevent the supply line underneath the drinker from freezing.

It is a split plastic coupler that fits into the corrugation of the Earth Tube. Used for joining multiple Earth Tubes.

Unaffected by ground movement due to freezing & thawing. It will take abuse! Corrugated design provides rigidity without bulk when back filled with earth. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.

Unaffected by ground movement due to freezing & thawing. It will take abuse! Corrugated design provides rigidity without bulk when back filled with earth. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

The low profile design & fully hinged door provids animals better access to the capacity of the water & combination water gasket & foam gasket ensures an airtight seal between the lid & base.

The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float. Thermostaically controlled to only run when necessary.

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

Valve 36" Float Cord Only.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

Foam insulation between walls has an R-value of 7.14". Seamless sidewall cannot leak. Stainless steel bolts & removable top afford easy access to plumbing. Optional wing bolts are available for Grade A inspections.

52 1/2" L x 46 1/4" W x 23 1/2" H 34# 5 Year warranty The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. High Country Plastics water tanks are rotational molded with high quality FDA approved...