Farm Equipment Livestock Waterers For Sale In St Petersburg

Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line. #9 on breakdown.

Constructed of Cast Aluminum for ultimate effiency & safety. Thermostatically controlled to only run when necessary. This donut shaped 500 Watt De-Icer is designed for multiple uses around the farm.

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body. #10 on breakdown.

SPI white corrugated baffle for model 4x4 energy free waterer.

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/4" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level.

Corrugated design provides rigidity without bulk when back filled with earth. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

The low profile design and fully hinged door provides animals better access to the water. Earth Tube is suggested with installation. This unit is insulated with 3 1/2" of polyurethane insulation.

SPI 351/352 (old style) Rubber Drain Plug only .

It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice. Tolerance to water level - you don't have to worry about summer & winter water levels.

Apex replacement float with string included.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

Blue 10 3/4" replacement ball for the Mira Fount 3354S, M3370S, M3390, M3390E cattle waterers & 3360-10 hog waterer.

It also features a molded bolt foot and rounded corners for livestock safety. No more rust or corrosion! These electric waterers are built of a polyethylene construction creating a strong corrosion free product to provide many years of trouble free operaton.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

Filter replacement for Topaz & Megaflow Valves.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Constructed of Cast Aluminum for ultimate effiency & safety. Thermostatically controlled to only run when necessary. This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

The brass arm and black round ball float only for an Apex Valve.

Robert's 3/4" rubber plunger seat only.

Drinker is very easy to clean--no disassembly for cleaning required. For stalls, corrals and paddocks. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection.

The Pride of the Farm "King" Energy Efficient drinker is beefy & ruggedly built but simple. There are no loose parts. You can expect an entire winter's heating bill of $25.00 or less - and this from a drinker that can water 250 head of beef using only...

Our drinker has foam filled double wall construction which adds to the efficiency. The Pride of the Farm "King" Energy Free drinker is beefy & ruggedly built but simple. 2" built in drain, stainless steel spring loaded attachment pins make cover removal...