Farm Equipment Livestock Waterers For Sale In St Louis

Use this valve assembly with the J303 with without heat.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

A brass rod float arm 1/4" x 1 1/4" with threads on each end. Connects valve to 301 round float.

Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line. #9 on breakdown.

This white pin holds the upper arm to the top base.

Unaffected by ground movement due to freezing & thawing. It will take abuse! Corrugated design provides rigidity without bulk when back filled with earth. 15" OD, corrugated plastic tubing.

Arkfeld waterer element replacement. 600 watt x 120 volt heating element only

Unaffected by ground movement due to freezing & thawing. It will take abuse! Corrugated design provides rigidity without bulk when back filled with earth. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID.

Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. #12-2 on the breakdown. This part number is for the arm only & is usually used on hog troughs.

Arkfeld waterer element replacement. 1000 watt x 240 volt heating element only.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

Saves money by using power only when temperatures require. Has many uses around the home & farm. Turns on at 35 degrees & turns off at 45 degrees. Five controlled temperatures (one just right for you) & no installation required.

14, 15, 16 in parts list. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers. B79P includes:Ref.

Valve 36" Float Cord Only.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

A brass rod float arm 1/4" x 7" with threads on each end. Connects valve to 301 round float.

The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. They can also be easily stacked for deeper installations. The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect...

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

It will turn on the heating element at 45 degrees Fahrenheit and off at 60 degrees to provide reliable freeze protection with the waterers. DO NOT SUMBERGE THE REPLACEMENT SENSOR, it is only designed to sense the temperature of the air.

White styrofoam round disc float only.

Black rubber seat to fit inside the Mira Fount RED Plunger in a Mira Fount cattle waterer valve.

1/2" orfice only for the inside of a Franklin Valve.

AS VERSATILE AS YOU CAN GET. Water horses, calves, wildlife with Performance One model WP06 . Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection.

Robert's 1/2" Leather cup ring that fits on the brass plunger.