Farm Equipment Livestock Waterers For Sale In Springfield

The orange cap only that fits over the insides of the Franklin Valve.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

Blue Flap for WPM20 Cattle Waterer

Arkfeld waterer element & thermostat replacement. 600 watt x 240 volt heating element with surface mount thermostat included.

70 Gallon Open Trough Tank offers more features. Pride of the Farm's trough drinker is a favorite for feed yards, pastures and dairies. It has 70 inches of drinking length and holds 70 gallons.

Available in light gray. Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Stainless steel access plates. Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers. It measures 3.25" x 4.25" x 2.38".

Frost pro is a device that fits Topaz and Vortex Valves to minimize freezing in cold weather conditions. It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the...

SPI 351/352 (old style) Rubber Drain Plug only .

No lock pins or inner parts included. Pride of the Farm VP124 plastic valve body only. #3 on breakdown.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

Robert's 3/4" rubber cup ring that fits on the brass plunger.

Thermostatically controlled to only run when necessary. Unit measures 7" in diameter, 110v, 1000 Watts. SAFE IN PLASTIC. Designed to fit into narrow opening in any hog waterer resevoir.

Constructed of Cast Aluminum for ultimate effiency & safety. Thermostatically controlled to only run when necessary. This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm.

The dogs chew on everything so I used the metal housing. Was exactly what I needed. If the unit does fail, the animals will still have water as it will flow freely. I have 2 on troughs for cattle and one for the dogs.

The Robert's 3/4" brass valve housing only.

Blue plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers.

Turns on at 35 degrees & turns off at 45 degrees. Has many uses around the home & farm. Operates with any 15 amp 120V electric heater or fan. Saves money by using power only when temperatures require.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

This diaphragm fits all Jug Model Valves.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

SPI white corrugated baffle for model 4x4 energy free waterer.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...