Farm Equipment Livestock Waterers For Sale In Spokane

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

Won't rust, resists rot & hold up to chemically active soil conditions. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen...

VP2 VALVE The VP2 is our next generation valve which replaces our VP1 valve series. No diaphragm, cam link and power link which are three fewer maintenance items. The last number on the VP2 matches up with the VP1 valve.

Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm. #5 on breakdown.

Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly. #8 on breakdown.

This black seat fits inside the plunger and shuts off the water through the orfice. Must be used with part #400267 Plunger Only.

O'Ring only replacement for Frost Pro Accessory.

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater. Do Not Immerse into liquid.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. All edges have been rounded for safety & strength. The one piece construction eliminates cracking & splitting common in plastic-welded,...

Available in Forest Green in stock, also available in Ash Grey, Black, Blue, Red & Tan colors for special order. All edges have been rounded for safety and strength. The one piece construction eliminates cracking & splitting common in plastic-welded,...

Designed to fit into narrow opening in any hog waterer resevoir. Unit measures 7" in diameter, 110v, 1000 Watts. SAFE IN PLASTIC. Thermostatically controlled to only run when necessary.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

A drain plug for Arkfeld waterers - 2" in size - Cork.

The Robert's 3/4" brass valve housing only.

Black rubber seat to fit inside the Mira Fount Blue Plunger in a Mira Fount cattle waterer valve.

#3 on breakdown. No lock pins or inner parts included. Pride of the Farm VP124 plastic valve body only.

This repair kit fits the Models 101, 202 & 404 with or without heat.

Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. THE RACE IS OVER. Available in light gray. Foam filled-R value of 7.5 per inch. OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations in box stalls--but...

SPI energy free models have a set back seal & drain to help couteract the problems associated with door freeze ups. The low profile design & fully hinged door provids animals better access to the capacity of the water & combination water gasket & foam...

Frost pro is a device that fits Topaz and Vortex Valves to minimize freezing in cold weather conditions. It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the...

With quick release access clips for the hatch cover and access doors, installation and work is a lot quicker. The new Value Series waterers from SPI are a "no tools required" waterer.

Used for joining multiple Earth Tubes. It is a split plastic coupler that fits into the corrugation of the Earth Tube.

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...