Farm Equipment Livestock Waterers For Sale In Shreveport

This diaphragm fits all Jug Model Valves.

A brass rod float arm 1/4" x 10" with threads on each end. Connects valve to 301 round float.

Inside repair kit for Topaz & Megaflow Valve.

A brass rod float arm 1/4" x 1 1/4" with threads on each end. Connects valve to 301 round float.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

Megaflow Yellow Float Only.

Robert's Brass 3/8" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

Frost pro is a device that fits Topaz and Vortex Valves to minimize freezing in cold weather conditions. It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the...

Use this valve assembly with the J303 with without heat.

A brass rod float arm 1/4" x 4" with threads on each end. Connect valve to 301 round float.

Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. The Tru-Test Apex Xtraflo 3/4" or 1" Trough Valve is a full flow - diaphragm activated, armless, self-cleaning valve mechanism.

Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly. #8 on breakdown.

You do need proper installation to prevent the supply line underneath the drinker from freezing. Over 300 square inches of access for easy hook up. No loose parts to lose. Two large drink openings 8" x 14" each.

All edges have been rounded for safety & strength. 3 year warranty. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole.

Robert's 1/2" rubber cup ring that fits on the brass plunger.

Apex replacement float with string included.

A brass rod float arm 1/4" x 5" with threads on each end. Connects valve to 301 round float.

It is a thermal sensing valve that is constatly in contact with the water & "intermittently" releases enough pressurized water to prevent surface ice as the water temperature dictates.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Unaffected by ground movement due to freezing & thawing. Corrugated design provides rigidity without bulk when back filled with earth. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID.

Same description as J101 EXCEPT THIS UNIT HAS NO HEAT.

Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. #12-3 on the breakdown. This part number is for the arm only & is usually used on the Polar Max waterers.

ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary. THIS UNIT IS FOR METAL TANKS ONLY. Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.