Farm Equipment Livestock Waterers For Sale In Santa Ana

Corrugated design provides rigidity without bulk when back filled with earth. Won't rust, resists rot & hold up to chemically active soil conditions. It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy...

Feature Include: Recessed, protected notches for anchoring. Two drain option. Warmer water pushes through the ports and cooler water returns under the baffle. Concrete stud lags included, High flow valve.

Red octagon plunger that fits inside the Mira Fount cattle waterer RED valve.

Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

3/4" orfice only for the inside of a Franklin Valve.

#2 on breakdown. No other parts come with the Cam Link. This is the arm that opens & closes the plunger. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin.

Was exactly what I needed. After 3 weeks of use, we have no leaks or overflows. The dogs chew on everything so I used the metal housing. I was purchasing to replace an older one that finally wore out.

SPI 4x4 Rubber Drain Plug only.

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/4" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level.

White styrofoam triangular disc float only.

The low profile design and fully hinged door provides animals better access to the water. It has a 15" drinking height, 9 1/2" x 9 1/2" door opening. The patented door closure system has a set back seal and drain to help counteract the problems associated...

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

Our drinker has foam filled double wall construction which adds to the efficiency. The Pride of the Farm "King" Energy Free drinker is beefy & ruggedly built but simple. 2" built in drain, stainless steel spring loaded attachment pins make cover removal...

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 1/2" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level.

This part number is for the arm only & is usually used on the Polar Max waterers. Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

Robert's 3/4" rubber cup ring that fits on the brass plunger.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

Guaranteed for 3 years & SAFE IN PLASTIC, rubber liners or concrete. Thermostatically controlled to only run when needed. Ideal for use in Ponds 50 to 600 gallons. Constructed of Cast Aluminum for ultimate efficiency & safety.

Black rubber seat to fit inside the Mira Fount RED Plunger in a Mira Fount cattle waterer valve.

Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies. Warmer water pushes through the ports and cooler water returns under the baffle. More drinking length.

Simplicity -- few parts; 2. If your drinker originally took a VP124, order a VP224, etc. VP2, from our program of continuous improvement, is designed to accomplish several things. Greater tolerance to operation in dirty conditions; 4.

Easy to install & installs in only minutes. Unit is unnoticed by livestock - no cord in water. Thermostatically controlled to only run when necessary. Custom made to use in all Rubbermaid stock tanks with 1500 Watts of power.