Farm Equipment Livestock Waterers For Sale In San Bernardino

These are not included when ordering a base only. There are four base screws that hold the top base to the bottom base.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

The Topaz is compact, robust and manufactured from non-corroding materials. They are made for tanks which have the valve mounted above or below the water. Features Has Detach for quick access to valve seal Mounts horizontally or vertically Made from corrosion...

Connects valve to 301 round float. A brass rod float arm 1/4" x 5" with threads on each end.

It is FDA & HPB approved, food grade, recyclable plastic. The D-Clip features no tools required to remove lid, no crossed/stripped thread failures, quick replacement if damaged & commonly available at farm supply stores.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

This model features an adjustable short arm for customizing water level. Robert's Brass 1/2" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

Connects valve to 301 round float. A brass rod float arm 1/4" x 7" with threads on each end.

This model features an adjustable short arm for customizing water level. Robert's Brass 3/4" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

3/4" male to female hose used to hook up the water line to the waterer.

21.75" W x 28" L x 16" H It has double walled foam-filled molded polyethylene construction. The brass valve and submersible heater are both enclosed by the valve hatch. 5 year warranty.

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It's design reduces stock damage and minimises blockage. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It's design reduces stock damage & minimises blockage. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI.

It measures 3.25" x 4.25" x 2.38". Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers.

Float Arm for the Mira Fount M3330 waterer.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

Arrived within three days. The dogs chew on everything so I used the metal housing. If the unit does fail, the animals will still have water as it will flow freely. That gives me peace of mind.

Connects valve to 301 round float A brass rod float arm 1/4" x 1 1/2" with threads on each end.

Available in Aqua Blue color only. 43 3/4" x 28 3/4" x 23" Comes with 1.25" drain installed. 3 year warranty. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Thermostat ONLY for all Johnson Concrete Waterer Models.

Robert's 1/2" rubber plunger seat only.

The orange cap only that fits over the insides of the Franklin Valve.

#5 on breakdown. Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm.