Farm Equipment Livestock Waterers For Sale In San Antonio

The orange cap only that fits over the insides of the Franklin Valve.

Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly. #8 on breakdown.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Pride of the Farm VP124 plastic valve body only. #3 on breakdown. No lock pins or inner parts included.

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. 3 year warranty. Available in Aqua Blue color only. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole,...

A drain plug for Arkfeld waterers - 1 1/2" in size - Cork.

3/4" orfice only for the inside of a Franklin Valve.

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount.

Black rubber seat to fit inside the Mira Fount Blue Plunger in a Mira Fount cattle waterer valve.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve. #6 on breakdown.

White polyethylene disc float only.

It's maximum 24-hr electical use is 1.56 kwh. This Jug 4 Hole Waterer has a 45 gallon tank capacity & waterers 125 head of Dairy, 250 head of Beef & 300 head of Sheep. Dimensions: 39" x 37" x 23"

SPI hatch cover for model 4x4 energy free waterer.

This diaphragm fits all Jug Model Valves.

The larger tanks feature incorporated pallet fork opening on the bottom, eliminating accidental punctures while providing easy transportation. High Country Plastics Water tanks are rotational molded with high quality FDA approved UV protected plastic...

Robert's 3/4" rubber cup ring that fits on the brass plunger.

Arkfeld waterer element & thermostat replacement. 600 watt x 120 volt heating element with surface mount thermostat included.

Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve. Suggested where sugar sand is a problem in the water supply.

SPI foamed 4x4 energy free waterer door only.

This black seat fits inside the plunger and shuts off the water through the orfice. Must be used with part #400267 Plunger Only.

O'Ring only replacement for Frost Pro Accessory.

23" W x 27" L x 20" H It is FDA & HPB approved, food grade, recyclable plastic. The D-Clip features no tools required to remove lid, no crossed/stripped thread failures, quick replacement if damaged & commonly available at farm supply stores.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.