Farm Equipment Livestock Waterers For Sale In Rockford

SPI 2 1/2" Brass Short Float Stem only.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount. Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet.

The MicroSweeper is plumbed near the float valve, usually in the port where the petcock was installed. It is a thermal sensing valve that is constatly in contact with the water & "intermittently" releases enough pressurized water to prevent surface ice...

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. Corrugated design provides rigidity without bulk when back filled with earth. It will take abuse!

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

Optional wing bolts are available for Grade A inspections. Weather strip & an insulated sleeve for the supply line come with each unit. Seamless sidewall cannot leak. Dependable, non siphoning valve - proven & trouble free.

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

Screw that holds the float connect to the top of the float.

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. All edges have been rounded for safety & strength. 28 1/2" x 20" x 10 1/4"

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies. It is loaded with features not available on any competing trough drinker. Water circulation is a assisted with our patented baffle design and discharge ports.

Connect valve to 301 round float. A brass rod float arm 1/4" x 4" with threads on each end.

Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation Lock off with cord lock 5-150 PSI pressure rating Inlet filter Constructed from corrosion resistant...

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

For seasonal maintenance, an external expansion drain plug makes cleaning simple. Easy for you and your animals. The wall mounted 303 JUG is perfect for existing barns or new installations.

Connects valve to 301 round float. A brass rod float arm 1/4" x 1 1/4" with threads on each end.

It takes a quarter turn with a straight edge screwdriver. Dependable, non-siphoning Durapride valve. The Pride of the Farm "Knight" Large Animal E-Drinker. Lower access opening is 6" x 19".

#9 on breakdown. Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line.

Do Not Immerse into liquid. 450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater.

Robert's 3/4" leather cup ring that fits on the brass plunger.