Farm Equipment Livestock Waterers For Sale In Rhode Island

(sold in pairs) SPI Rubber door hinges with screws for all of the New Generation energy free waterer.

White styrofoam triangular disc float only.

The MicroSweeper is designed an manufactured to provide a long life in tough conditions and to deliver unexcelled performance. The MicroSweeper requires no maintenance, no electricity and no adjustment, EVER.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

It measures 3.25" x 4.25" x 2.38". Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers.

Robert's 3/4" rubber plunger seat only.

#9 on breakdown. Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line.

Compared to other "intermittent flow devices", the Ice Sweeper is very dependable, uses less water & shuts off water flow reliably when the threat of the water freezing is gone. * Compared to warming tanks with heaters, the Ice Sweeper saves money.

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/4" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level.

Connects valve to 301 round float A brass rod float arm 1/4" x 1 1/2" with threads on each end.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet.

It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the valve and pipe work supplying it.

This piece is held by two thumbscrews not included in this part. 6 1/2" orange arm that fits between the lower arm and the float connect.

The Topaz is compact, robust and manufactured from non-corroding materials. They are made for tanks which have the valve mounted above or below the water. Features Has Detach for quick access to valve seal Mounts horizontally or vertically Made from corrosion...

Available in Forest Green in stock, other colors such as Ash Grey, Black, Blue, Red & Tan available by special order. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch...

Suggested where sugar sand is a problem in the water supply. Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve.

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/8" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level.

3/4" orfice only for the inside of a Franklin Valve.

The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. It has an excellent insulating property of R15 and amazing structural strength. Highly recommended for ALL cold climate installations.

This drain plug fits Models 101, 202, 303 & 404 with or without heat.

Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch...

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

Unique baffles guard against icing & keep valve operating under severest conditions. Seamless sidewall cannot leak. Notched flanges for easy anchoring. Foam insulation between walls has an R-value of 7.14".

This part number is for the arm only & is usually used on hog troughs. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.