Farm Equipment Livestock Waterers For Sale In Raleigh

Black rubber seat to fit inside the Mira Fount Blue Plunger in a Mira Fount cattle waterer valve.

Connect valve to 301 round float. A brass rod float arm 1/4" x 4" with threads on each end.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 1/4" Orifice on a VP124 Valve. #7 on breakdown.

Serves 350 beef, 150 dairy, 225 cow/calf. Optional wing bolts are available for Grade A inspections. No pulleys & cable to foul & rust. Sealed bottom keeps out moisture & rodents. It has simple installation, attractive design & has animal friendly flaps...

SPI 90 degree elbow for all models.

Connects valve to 301 round float. A brass rod float arm 1/4" x 2" with threads on each end.

No more rust or corrosion! These electric waterers are built of a polyethylene construction creating a strong corrosion free product to provide many years of trouble free operaton.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

Robert's 3/4" leather cup ring that fits on the brass plunger.

With a 40 gallon capacity the waterer has a maximum usage of 200 Beef cows or 90 Dairy cows. The peaked roof and raised ribs around the door openings prevent manure, feed and other contaminants from being washed into the bowl, and facilitates water run...

Heating element ONLY for the Johnson Concrete Model J360.

Robert's 1/2" rubber cup ring that fits on the brass plunger.

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Use this valve assembly with the J303 with without heat.

Large 2 External AND Internal (5.1 cm) clean out drains. The bottom has a cavity for warm climate installations only. The cavity can be used to make the connection from the supply line to our valve.

Apex replacement float with string included.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

Guaranteed for 3 years & SAFE IN PLASTIC, rubber liners or concrete. Thermostatically controlled to only run when needed. Ideal for use in Ponds 50 to 600 gallons. Constructed of Cast Aluminum for ultimate efficiency & safety.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

It is loaded with features not available on any competing trough drinker. Grade A compliant. It has 70 inches of drinking length and holds 70 gallons. More drinking length. Backed with the strongest warranty available.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.