Farm Equipment Livestock Waterers For Sale In Port St Lucie

Red octagon plunger that fits inside the Mira Fount cattle waterer RED valve.

It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed by livestock. SAFE IN PLASTIC TANKS. 1 year warranty. Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during...

This repair kit fits the Models 101, 202 & 404 with or without heat.

SPI 90 degree elbow for all models.

Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve. Suggested where sugar sand is a problem in the water supply.

This unit fits the Model 101, 202 & 404 with or without heat.

3 year warranty. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. Aqua Blue color only.

Plastic piece that sits on top of the float. It is held by a float screw and connects on to the bottom of the float arm.

White polyethylene disc float only.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers. It measures 3.25" x 4.25" x 2.38".

Megaflow Yellow Float Only.

Arkfeld waterer element replacement. 600 watt x 120 volt heating element only

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

Pride of the Farm Element for electric waterer units.

Topaz Float Valves are ideal for filling tanks where mounting above the water is preferred. The Topaz is compact, robust and manufactured from non-corroding materials. They are made for tanks which have the valve mounted above or below the water.

SPI 4x4 Rubber Drain Plug only.

Apex replacement float with string included.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

This part number is for the arm only & is usually used on the Polar Max waterers. Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below.

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect the water line from freeze ups. The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation.

Black rubber seat to fit inside the Mira Fount RED Plunger in a Mira Fount cattle waterer valve.

Float Arm for the Mira Fount M3330 waterer.

A brass rod float arm 1/4" x 1 1/2" with threads on each end. Connects valve to 301 round float

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.