Farm Equipment Livestock Waterers For Sale In Pasadena

This unit fits the Model 101, 202 & 404 with or without heat.

Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line. #9 on breakdown.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

Pride of the Farm Element for electric waterer units.

Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground. It will take abuse! Unaffected by ground movement due to freezing & thawing.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

Robert's 1/2" rubber plunger seat only.

The brass arm and black round ball float only for an Apex Valve.

That means less pumping and less impoundement of run-off. Only water that is close to freezing is discharged. Compared to other "intermittent flow devices", the Ice Sweeper is very dependable, uses less water & shuts off water flow reliably when the threat...

The heat tube is designed to mate with the cavity under the drinker base. You should use silicon caulk to assure an airtight fit. Both the water line & the electrical supply can enter from below.

B81 includes: Ref. 6, 7 and 12 (see parts list in pictures attached) B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker.

The Pride of the Farm "King" Energy Free drinker is beefy & ruggedly built but simple. 2" built in drain, stainless steel spring loaded attachment pins make cover removal & replacement easy, recessed, protected notches for secure anchoring, overflow port...

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

A brass rod float arm 1/4" x 6" with threads on each end. Connects valve to 301 round float.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect the water line from freeze ups.

The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Replacement Plastic Valve & Float f/ WFD85 and MFD85 field drinkers.

SPI's energy Free models are built of a polyethylene construction creatin g a strong corrosion free product to provide man years of trouble free operation. The low profile design & fully hinged door provids animals better access to the capacity of the...

A brass rod float arm 1/4" x 7" with threads on each end. Connects valve to 301 round float.

SPI 3.75" Brass Short Float Stem only.

The Jug Basic Float Valve fits Models J101, 202, 303 & 404 with or without heat.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...