Farm Equipment Livestock Waterers For Sale In Palmdale

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

Turns on at 35 degrees & turns off at 45 degrees. Works automatically to ambient temperature. Operates with any 15 amp 120V electric heater or fan. Saves money by using power only when temperatures require.

It moves the plunger to and from the orfice. The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin.

#11 on breakdown. Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included).

#8 on breakdown. Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly.

1/2" orfice only for the inside of a Franklin Valve.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet.

No lock pins or inner parts included. #3 on breakdown. Pride of the Farm VP124 plastic valve body only.

No inside working parts included. The orange male fitting end of the Franklin Valve.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

A drain plug for Arkfeld waterers - 1 1/2" in size - Cork.

SPI foamed 4x4 energy free waterer door only.

Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin. This is the arm that opens & closes the plunger. No other parts come with the Cam Link. #2 on breakdown.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. 8' 2" Diameter x 26" H 113# 5 Year Warranty High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected...

Suggested where sugar sand is a problem in the water supply. Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve.

For stalls, corrals and paddocks. Our VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

No other parts are included with this Power Link. #1 on breakdown. Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm.

Robert's 3/4" rubber plunger seat only.

Connects valve to round float. A brass rod float arm 1/4" x 1" with threads on each end.

SPI 2 1/2" Brass Short Float Stem only.

It takes a quarter turn with a straight edge screwdriver. Lower access opening is 6" x 19". The Pride of the Farm "Knight" Large Animal Energy Free Drinker. Model WP012 is loaded & is also one of the better looking drinkers ever to reach the market.