Farm Equipment Livestock Waterers For Sale In Omaha

Robert's 3/4" leather cup ring that fits on the brass plunger.

The Robert's 3/4" brass valve housing only.

High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.

They mount above or below the water and give flows of up to 6 gallons per minute. Rojo Float Valves are ideal for filling water drinking troughs for small numbers of animals. FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy...

SPI white corrugated baffle for model 4x4 energy free waterer.

Drinker is very easy to clean-no disassembly for cleaning required. OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations in box stalls--but can be installed outdoors as well.

This is the arm that opens & closes the plunger. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin. #2 on breakdown. No other parts come with the Cam Link.

All edges have been rounded for safety & strength. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

Suggested where sugar sand is a problem in the water supply. Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve.

#5 on breakdown. Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm.

It's design reduces stock damage and minimizes blockage. The Tru-Test Apex Xtraflo 3/4" or 1" Trough Valve is a full flow - diaphragm activated, armless, self-cleaning valve mechanism.

Pride of the Farm Element for electric waterer units.

High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Connects valve to 301 round float A brass rod float arm 1/4" x 1 1/2" with threads on each end.

The last number on the VP2 matches up with the VP1 valve. Greater tolerance to operation in dirty conditions; 4. A greater flow rate because the plunger travels a longer distance; 3.

1000 watt x 120 volt heating element only. Arkfeld waterer element replacement.

Thermostat ONLY for all Johnson Concrete Waterer Models.

Unlike the original concept of the submerged bulb to sense water temperature, this unit senses the air temperature immediately surrounding the water basin, therefore, it is not designed for water submersion.

All edges have been rounded for safety and strength. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

White polyethylene disc float only.

Connects valve to 301 round float. A brass rod float arm 1/4" x 2" with threads on each end.

This One Hole waterer has a 7 gallon tank capacity, waters up to 25 head of Dairy, 50 head of Beef & 75 head of sheep. Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally...