Farm Equipment Livestock Waterers For Sale In Oakland

Pride of the Farm 1/4" Orifice on a VP124 Valve. It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

1/2" orfice only for the inside of a Franklin Valve.

Robert's Brass cotter key that connects the long arm to the valve body.

Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during freezing temperatures. It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed by livestock.

Surface mount thermostat used in galvanized waterers. Turns on at 36 degrees and turns off at 48 degrees. Often used in Franklin & Arkfeld waterers.

A drain plug for Arkfeld waterers - 2" in size - Cork.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve.

#6 on breakdown. Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve.

14, 15, 16 in parts list. B79P includes:Ref. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers.

Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom. Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute.

Result = cleaner waterer inside & out. The low profile design & fully hinged door provids animals better access to the capacity of the water & combination water gasket & foam gasket ensures an airtight seal between the lid & base.

SPI 3.75" Brass Short Float Stem only.

Blue Flap for WPM20 Cattle Waterer

(sold in pairs) SPI Rubber door hinges with screws for all of the New Generation energy free waterer.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

Float Arm for the Mira Fount M3330 waterer.

This diaphragm fits all Jug Model Valves.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

Connects valve to round float. A brass rod float arm 1/4" x 1" with threads on each end.

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. XtraFlo compact diaphragm valve has full-flow, high volume fill.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.