Farm Equipment Livestock Waterers For Sale In Newark

Connects valve to 301 round float. A brass rod float arm 1/4" x 7" with threads on each end.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

It has 70 inches of drinking length and holds 70 gallons. Grade A compliant. Each opening is 5" x 9", Superb supply line protection. The tower is foamed filled and the surrounding wall and valve cover are foam filled, Shutoff valve, 3/4" is standard,...

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

SPI hatch cover for model 4x4 energy free waterer.

The connect the Cam & Power Link to the VP124 valve body. You will need 2 per valve assembly. #4 on breakdown Pride of the Farm Link pin only.

THIS UNIT IS FOR METAL TANKS ONLY. Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee. ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary.

This repair kit fits the Models 101, 202 & 404 with or without heat.

It moves the upper arm and is also held by thumbscrew to the float arm. The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin.

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

Robert's 1/2" rubber plunger seat only.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet.

Available in Aqua Blue color only. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. 43 3/4" x 28 3/4" x 23" Comes with 1.25" drain installed.

Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. Corrugated design provides rigidity without bulk when back filled with earth.

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. The Megaflow is compact, robust and manufactured from non-corroding materials.

Johnson Waterer Element Clips to hold the heating element.

3/4" orfice only for the inside of a Franklin Valve.

Use this valve assembly with the J303 with without heat.

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. The Megaflow is compact, robust and manufactured from non-corroding materials.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close.

Polyethylene Blue in color. This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights. 5 year warranty. 22" W x 32" L x 26" H

SPI white corrugated baffle for model 4x4 energy free waterer.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount. Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet.