Farm Equipment Livestock Waterers For Sale In New Jersey

The Tru-Test Apex Xtraflo 3/4" or 1" Trough Valve is a full flow - diaphragm activated, armless, self-cleaning valve mechanism. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI.

52" L x 30 3/4" W x 24" H 33# 5 year warranty Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. All edges have been rounded for safety & strength.

Grade A compliant. There also is a 3 inch opening at the bottom of the tower which permits drainage through a tile line to a lagoon, Constant flow at 70 gallon and at 45 gallons, Valve and Heater - 18 month unconditional warranty.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

The orange cap only that fits over the insides of the Franklin Valve.

This diaphragm fits all Jug Model Valves.

#12-2 on the breakdown. This part number is for the arm only & is usually used on hog troughs. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Optional heater, 250 watts, 110 volts. Water horses, calves, wildlife with Performance One model WP06.

40 1/2" x 28 1/4" x 14 1/4" Available in Aqua Blue color only. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. High Country Plastics Aqua Tank products are rotational molded with high...

SPI 2 1/2" Brass Short Float Stem only.

Same description as J101 EXCEPT THIS UNIT HAS NO HEAT.

Connects valve to 301 round float A brass rod float arm 1/4" x 1 1/2" with threads on each end.

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

It moves the upper arm and is also held by thumbscrew to the float arm. The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin.

Molded with the most effective ultraviolet inhibitor. Second, our supply line is in the water. Two 2 inch side drains and 1 threaded bottom port for optional inside drain. Two large drink openings 8" x 14" each.

This 90 degree corner mounting design gives a snug fit into the stall and leaves only a smooth, rounded surface exposed to the pen keeping animals safer. The wall mounted 303 JUG is perfect for existing barns or new installations.

THIS UNIT IS FOR METAL TANKS ONLY. Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee. ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

It is held by a float screw and connects on to the bottom of the float arm. Plastic piece that sits on top of the float.

Connects valve to 301 round float. A brass rod float arm 1/4" x 10" with threads on each end.

Connects valve to 301 round float. A brass rod float arm 1/4" x 2" with threads on each end.

Drinker is very easy to clean-no disassembly for cleaning required. Simple water level adjustment, easy to clean. Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below.

Jug Thermostat fits Models 101, 202, 303 & 404 with heat.

The valve has a 1” water level differential between opening and closing, reducing pump motor overload. The top entry model provides an air gap, preventing back-flow. XtraFlo compact diaphragm valve has full-flow, high volume fill.