Farm Equipment Livestock Waterers For Sale In New Hampshire

22" W x 32" L x 26" H With quick release access clips for the hatch cover and access doors, installation and work is a lot quicker. Polyethylene Blue in color. The new Value Series waterers from SPI are a "no tools required" waterer.

SPI 351 (old style) gasket only.

Two drain option. Our 8 notches do not protrude where they can be hit. Warmer water pushes through the ports and cooler water returns under the baffle. Water circulation is a assisted with our patented baffle design and discharge ports.

Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. #12-2 on the breakdown. This part number is for the arm only & is usually used on hog troughs.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

It moves the plunger to and from the orfice. The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin.

Jug Thermostat fits Models 101, 202, 303 & 404 with heat.

Robert's 3/4" rubber cup ring that fits on the brass plunger.

#5 on breakdown. Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

The heat tube is designed to mate with the cavity under the drinker base. Both the water line & the electrical supply can enter from below. You should use silicon caulk to assure an airtight fit.

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

#10 on breakdown. Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body.

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation...

Has many uses around the home & farm. Works automatically to ambient temperature. Saves money by using power only when temperatures require. Five controlled temperatures (one just right for you) & no installation required.

Same desription as the J202 EXCEPT THIS UNIT HAS NO HEAT!

It will take abuse! Won't rust, resists rot & hold up to chemically active soil conditions. Unaffected by ground movement due to freezing & thawing. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID.

Filter replacement for Topaz & Megaflow Valves.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

Robert's Brass cotter key that connects the long arm to the valve body.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

Constructed of Cast Aluminum for ultimate effiency & safety. This donut shaped 500 Watt De-Icer is designed for multiple uses around the farm. Thermostatically controlled to only run when necessary.

Grade A compliant. Extra supply line protection, patented water circulation, multiple constant flow and drain options. It has 70 inches of drinking length and holds 70 gallons. It is loaded with features not available on any competing trough drinker.

All edges have been rounded for safety & strength. Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. 6' 1" Diameter x 25 1/2" H 71# 5 Year Warranty

B79P includes:Ref. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers. 14, 15, 16 in parts list.