Farm Equipment Livestock Waterers For Sale In Nevada

White styrofoam triangular disc float only.

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

Notched flanges for easy anchoring. Dependable, non siphoning valve - proven & trouble free. It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice.

1 per model EXCEPT 404 models need 2 kits. Weather seal Kit for Jug 101, 202 & 404 with or without heat.

Megaflow Yellow Float Only.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

Robert's Brass cotter key that connects the long arm to the valve body.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet.

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

Robert's Brass thumbscrew that connects the short arm and long arm.

22" W x 32" L x 26" H This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights. 5 year warranty. Polyethylene Blue in color.

Connects valve to 301 round float. A brass rod float arm 1/4" x 6" with threads on each end.

Our chamber can go as low as minus 30 degrees F (-34.4 degrees C). Drinker is very easy to clean-no disassembly for cleaning required. Simple water level adjustment, easy to clean.

Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It's design reduces stock damage and minimizes blockage.

Apex replacement float with string included.

-Minimal Assembly -Strong Utra-violet Light Protection to prevent Fading/Cracking -One Inch (2.54 cm) Drain Plug (Drain is to the left as you face drinker) -Drinker Opening is: 14.0"(35.6 cm )W 16.5"(41.9 cm) H 12.0"(30.5 cm) D

A drain plug for Arkfeld waterers - 1 1/2" in size - Cork.

SPI hatch cover for model 4x4 energy free waterer.

23" W x 27" L x 20" H Result = cleaner waterer inside & out. It is FDA & HPB approved, food grade, recyclable plastic. SPI's energy Free models are built of a polyethylene construction creatin g a strong corrosion free product to provide man years of...

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

It's maximum 24-hr electical use is 1.56 kwh. This Jug 4 Hole Waterer has a 45 gallon tank capacity & waterers 125 head of Dairy, 250 head of Beef & 300 head of Sheep. Dimensions: 39" x 37" x 23"

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

This piece holds the plunger and upper arm. The inside base of the Franklin Valve. No inside working parts included.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

#9 on breakdown. Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line.