Farm Equipment Livestock Waterers For Sale In Moreno Valley

Robert's 3/4" rubber plunger seat only.

Stock Tank With Built-In Drinker Model PRE224BID comes standard with one built-in drinker. -Minimal Assembly -Strong Utra-violet Light Protection to prevent Fading/Cracking -One Inch (2.54 cm) Drain Plug (Drain is to the left as you face drinker) -Drinker...

This unit fits the Model 101, 202 & 404 with or without heat.

Thermostatically controlled to only run when necessary. SAFE IN PLASTIC. Designed to fit into narrow opening in any hog waterer resevoir. Unit measures 7" in diameter, 110v, 1000 Watts.

Operates effecicently at the bottom of the bucket because warm water rises. 1 year warranty. SAFE IN PLASTIC. The 250W elemnt is encased in aluminum for durability & safety. Farm Innovator's Ice Chaser operates automatically only during freezing temperatures.

Blue Flap for WPM20 Cattle Waterer

A brass rod float arm 1/4" x 1 1/4" with threads on each end. Connects valve to 301 round float.

Arkfeld waterer element replacement. 1000 watt x 120 volt heating element only.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

They don�t have to learn to lift flaps or push balls and floats are out of the way; they just use their natural sucking method to drink from the open hole. This 90 degree corner mounting design gives a snug fit into the stall and leaves only a smooth,...

It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI.

A brass rod float arm 1/4" x 1 1/2" with threads on each end. Connects valve to 301 round float

Unaffected by ground movement due to freezing & thawing. It will take abuse! 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. Won't rust, resists rot & hold up to chemically active soil conditions.

The MicroSweeper is plumbed near the float valve, usually in the port where the petcock was installed. No more-no less. The intermittent flow MicroSweeper can be easily plumbed in any type of waterer, no matter how it was originally equipped.

Use this valve assembly with the J303 with without heat.

Unaffected by ground movement due to freezing & thawing. It will take abuse! 15" OD, corrugated plastic tubing. Won't rust, resists rot & holds up to chemically active soil conditions.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

14, 15, 16 in parts list. B79P includes:Ref. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers.

They can also be easily stacked for deeper installations. Highly recommended for ALL cold climate installations. The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

A round float for Arkfeld,SPI or Mira Fount waterers.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

The brass arm and black round ball float only for an Apex Valve.

Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Foam filled-R value of 7.5 per inch. Drinker is very easy to clean-no disassembly for cleaning required. Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube...

Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. #12-3 on the breakdown. This part number is for the arm only & is usually used on the Polar Max waterers.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.