Farm Equipment Livestock Waterers For Sale In Montgomery

1/2" orfice only for the inside of a Franklin Valve.

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

SPI 2 1/2" Brass Short Float Stem only.

Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. #12-3 on the breakdown. This part number is for the arm only & is usually used on the Polar Max waterers.

Arkfeld waterer element replacement. 600 watt x 240 volt heating element only.

Black rubber seat to fit inside the Mira Fount RED Plunger in a Mira Fount cattle waterer valve.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Filter replacement for Topaz & Megaflow Valves.

No diaphragm, cam link and power link which are three fewer maintenance items. VP2, from our program of continuous improvement, is designed to accomplish several things. If your drinker originally took a VP124, order a VP224, etc.

This unit fits the Model 101, 202 & 404 with or without heat.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

SPI 351 (old style) gasket only.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

The orange male fitting end of the Franklin Valve. No inside working parts included.

Arkfeld waterer element & thermostat replacement. 600 watt x 120 volt heating element with surface mount thermostat included.

Use this valve assembly with the J303 with without heat.

I have 2 on troughs for cattle and one for the dogs. After 3 weeks of use, we have no leaks or overflows. Arrived within three days. I was purchasing to replace an older one that finally wore out.

The Megaflow is compact, robust and manufactured from non-corroding materials. Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation Lock off with cord...

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons per minute. They are made for tanks which have the valve mounted above or below the water. The Topaz is compact, robust and manufactured from non-corroding materials.

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

A brass rod float arm 1/4" x 8" with threads on each end. Connects valve to 301 round float.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

Frost pro is a device that fits Topaz and Vortex Valves to minimize freezing in cold weather conditions. It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the...

Robert's 1/2" rubber cup ring that fits on the brass plunger.