Farm Equipment Livestock Waterers For Sale In Mobile

These are not included when ordering a base only. There are four base screws that hold the top base to the bottom base.

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

Connects valve to 301 round float. A brass rod float arm 1/4" x 2" with threads on each end.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm.

It is a split plastic coupler that fits into the corrugation of the Earth Tube. Used for joining multiple Earth Tubes.

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. The Megaflow is compact, robust and manufactured from non-corroding materials.

3/4" male to female hose used to hook up the water line to the waterer.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

#6 on breakdown. Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve.

Seamless sidewall cannot leak. No pulleys & cable to foul & rust. Tolerance to water level - you don't have to worry about summer & winter water levels. Double wall DURAROCK construction contains hindered amine light stabilizer, the most effective ultraviolet...

Same desription as the J202 EXCEPT THIS UNIT HAS NO HEAT!

Float is easily adjustable for varying water levels, Spring loaded pin allows access panel to pop off with the twist of a screwdriver. Pride of the Farm's trough drinker is a favorite for feed yards, pastures and dairies.

#5 on breakdown. Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

Our VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Water horses, calves, wildlife with Performance One model WP06. For stalls, corrals and paddocks. The cavity can be used to make the connection from the supply line to our valve.

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

Connects valve to 301 round float. A brass rod float arm 1/4" x 7" with threads on each end.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.