Farm Equipment Livestock Waterers For Sale In Miami

The heat tube is designed to mate with the cavity under the drinker base. You should use silicon caulk to assure an airtight fit. Both the water line & the electrical supply can enter from below.

This is the arm that opens & closes the plunger. No other parts come with the Cam Link. #2 on breakdown. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin.

Drinking height is 15" Door Opening is 9 1/2" x 9 1/2" and trough holds 17 gallons of water. And a MINI USE of 10 mature adult head. Result = cleaner waterer inside & out. Peaked roof & raised ribs around the door openings prevents manure, feed & other...

2" built in drain, stainless steel spring loaded attachment pins make cover removal & replacement easy, recessed, protected notches for secure anchoring, 250 watt heater, overflow port & dependable non-siphoning Durapride Valve.

Connect valve to 301 round float. A brass rod float arm 1/4" x 4" with threads on each end.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Connects valve to 301 round float. A brass rod float arm 1/4" x 5" with threads on each end.

Connects valve to 301 round float. A brass rod float arm 1/4" x 10" with threads on each end.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

600 watt x 120 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

The brass arm and black round ball float only for an Apex Valve.

The only drawback is that if the nozzle is attached, I cannot close the tail gate on my truck. The High Country Plastics TC-63 Pickup Bed Water Caddy is an innovative way to haul up to 63 gallons of fresh water in your pickup truck while still allowing...

Guaranteed for 1 year & SAFE IN PLASTIC. This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm. Thermostatically controlled to only run when necessary. Constructed of Cast Aluminum for ultimate effiency & safety.

Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. The Tru-Test Apex Xtraflo 3/4" or 1" Trough Valve is a full flow - diaphragm activated, armless, self-cleaning valve mechanism.

70 Gallon Open Trough Tank offers more features. More drinking length. It is loaded with features not available on any competing trough drinker. Water supply line enters through our unique tower.

Available in light gray. Foam filled-R value of 7.5 per inch. Our chamber can go as low as minus 30 degrees F (-34.4 degrees C). Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

Tolerance to water level - you don't have to worry about summer & winter water levels. Serves 200 sheep or 100 calves. Notched flanges for easy anchoring. Weather strip & an insulated sleeve for the supply line come with each unit.

Tolerance to water level - you don't have to worry about summer & winter water levels. Serves 100 hogs, 50 sow. Notched flanges for easy anchoring. Weather strip & an insulated sleeve for the supply line come with each unit.

High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

This unit fits the Model 101, 202 & 404 with or without heat.

#8 on breakdown. Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly.

Connects valve to 301 round float A brass rod float arm 1/4" x 1 1/2" with threads on each end.

Connects valve to 301 round float. A brass rod float arm 1/4" x 7" with threads on each end.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.