Farm Equipment Livestock Waterers For Sale In Mcallen

Robert's 1/2" rubber cup ring that fits on the brass plunger.

Topaz Float Valves are ideal for filling tanks where mounting above the water is preferred. Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons per minute.

Weather seal Kit for Jug 101, 202 & 404 with or without heat. 1 per model EXCEPT 404 models need 2 kits.

Inside repair kit for Topaz & Megaflow Valve.

SPI 351 (old style) gasket only.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

White polyethylene disc float only.

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. 3 year warranty. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common...

This diaphragm fits all Jug Model Valves.

Plastic piece that sits on top of the float. It is held by a float screw and connects on to the bottom of the float arm.

Farm Innovator's Ice Chaser operates automatically only during freezing temperatures. Operates effecicently at the bottom of the bucket because warm water rises. The 250W elemnt is encased in aluminum for durability & safety.

3/4" orfice only for the inside of a Franklin Valve.

This black seat fits inside the plunger and shuts off the water through the orfice. Must be used with part #400267 Plunger Only.

Dependable, non-siphoning Durapride valve. Lower access opening is 6" x 19". The Pride of the Farm "Knight" Large Animal E-Drinker. (30 years of use) A typical annual heating bill with Model WPO12 might be somewhat higher than with Model WPO17 - maybe...

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve. Suggested where sugar sand is a problem in the water supply.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

Arkfeld waterer element replacement. 600 watt x 240 volt heating element only.

Double wall, single piece poly construction -- ALL SMOOTH! Internal 3/4" (1.9 cm) AND external 2" (5.1 cm) drains. Foam filled-R value of 7.5 per inch. Simple water level adjustment, easy to clean.

A drain plug for Arkfeld waterers - 2" in size - Cork.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

Useful for feeding or watering rabbits, poultry or any type of small animal. Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage. Capacity is one-half pint (1 cup).

Thermostatically controlled to only run when needed. Features heavy duty anti-chew protector. The most durable floating tank de-icer available with 1250 Watts. Constructed of Cast Aluminum for ultimate efficiency & safety.