Farm Equipment Livestock Waterers For Sale In Lexington Fayette

Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below. Heating cost is minimal-less than $10.00 per heating season. Available in light gray.

21.75" W x 28" L x 16" H Engineered with the farmer in mind, this waterer allows easy access to the submersible heater, water line, incoming services and provides effortless cleaning; an extremely low maintenance product.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

A brass rod float arm 1/4" x 8" with threads on each end. Connects valve to 301 round float.

Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers. It measures 3.25" x 4.25" x 2.38".

Johnson Waterer Element Clips to hold the heating element.

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 5/32" Orifice on a VP124 Valve. #7 on breakdown.

Float is easily adjustable for varying water levels, Spring loaded pin allows access panel to pop off with the twist of a screwdriver. There also is a 3 inch opening at the bottom of the tower which permits drainage through a tile line to a lagoon, Constant...

3/4" male to female hose used to hook up the water line to the waterer.

This repair kit fits the Models 101, 202 & 404 with or without heat.

8' 2" Diameter x 26" H 113# 5 Year Warranty The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected...

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Thermostatically controlled to only run when necessary. Guaranteed for 1 year & SAFE IN PLASTIC.

Float Arm for the Mira Fount M3330 waterer.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Polyethylene Blue in color. With quick release access clips for the hatch cover and access doors, installation and work is a lot quicker. This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those...

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

A brass rod float arm 1/4" x 5" with threads on each end. Connects valve to 301 round float.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection cover for easy access to float valve *External Adjustment Screw for water...

High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Screw that holds the float connect to the top of the float.

Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve. Suggested where sugar sand is a problem in the water supply.

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

SPI 351/352 (old style) Rubber Drain Plug only .