Farm Equipment Livestock Waterers For Sale In Lancaster

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

Float Arm for the Mira Fount M3330 waterer.

Up to 50% more usable water capacity than the competition. The new Next Generation waterer utilizes 4 Quick Release D-Clips to secure the top to the trough, thus "no tools are required" to gain access to the valve.

It's design reduces stock damage and minimises blockage. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close.

Filter replacement for Topaz & Megaflow Valves.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

1000 Watt Immersible element used in the PC2 or PC10 waterer.

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

Unaffected by ground movement due to freezing & thawing. Won't rust, resists rot & holds up to chemically active soil conditions. It will take abuse! 15" OD, corrugated plastic tubing.

THIS UNIT IS FOR METAL TANKS ONLY. ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary. Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee.

This bolt package is for Models 101, 202 & 404 with or without heat.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

Both the water line & the electrical supply can enter from below. The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add heat tape to the water supply line.

These are not included when ordering a base only. There are four base screws that hold the top base to the bottom base.

Red octagon plunger that fits inside the Mira Fount cattle waterer RED valve.

Aqua Blue color only. 3 year warranty. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

It has 70 inches of drinking length and holds 70 gallons. Warmer water pushes through the ports and cooler water returns under the baffle. 70 Gallon Open Trough Tank offers more features.

Connect valve to 301 round float. A brass rod float arm 1/4" x 4" with threads on each end.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

Blue Flap for WPM20 Cattle Waterer

Valve 36" Float Cord Only.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.