Farm Equipment Livestock Waterers For Sale In Lakewood

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

Filter replacement for Topaz & Megaflow Valves.

Screw that holds the float connect to the top of the float.

It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed by livestock. Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during freezing temperatures.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

A brass rod float arm 1/4" x 7" with threads on each end. Connects valve to 301 round float.

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Only water that is close to freezing is discharged. * Compared to warming tanks with heaters, the Ice Sweeper saves money. * The device is all mechanical, no electricity required and built with quality material to provice long service in a harsh environment.

It will turn on the heating element at 45 degrees Fahrenheit and off at 60 degrees to provide reliable freeze protection with the waterers. Unlike the original concept of the submerged bulb to sense water temperature, this unit senses the air temperature...

All edges have been rounded for safety & strength. 6' 1" Diameter x 25 1/2" H 71# 5 Year Warranty The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks.

Drinker is very easy to clean-no disassembly for cleaning required. THE RACE IS OVER. Available in light gray. Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute.

Simplicity -- few parts; 2. If your drinker originally took a VP124, order a VP224, etc. The last number on the VP2 matches up with the VP1 valve. VP2 VALVE The VP2 is our next generation valve which replaces our VP1 valve series.

No lock pins or inner parts included. #3 on breakdown. Pride of the Farm VP124 plastic valve body only.

The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It's design reduces stock damage and minimises blockage. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level...

SPI Drain Plug (#11) for all New Generation waterers.

Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included). #11 on breakdown.

This drain plug fits Models 101, 202, 303 & 404 with or without heat.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

The heat tube is designed to mate with the cavity under the drinker base. The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add heat tape to the water supply line.

Pride of the Farm Element for electric waterer units.

It has a 15" drinking height and four 9 1/2" x 9 1/2" door opening. Earth Tube is suggested with installation. The new Next Generation waterer utilizes 4 Quick Release D-Clips to secure the top to the trough, thus "no tools are required" to gain access...