Farm Equipment Livestock Waterers For Sale In Lafayette

SPI white corrugated baffle for model 4x4 energy free waterer.

The connect the Cam & Power Link to the VP124 valve body. #4 on breakdown You will need 2 per valve assembly. Pride of the Farm Link pin only.

#12-2 on the breakdown. This part number is for the arm only & is usually used on hog troughs. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

Screw that holds the float connect to the top of the float.

600 watt x 120 volt heating element only Arkfeld waterer element replacement.

#3 on breakdown. No lock pins or inner parts included. Pride of the Farm VP124 plastic valve body only.

Available in light gray. Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below. Optional ground mount tube (Model HT10) for hookup to underground service connections and for outdoor installations.

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

#10 on breakdown. Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body.

This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/8" orifice Valve complete with plunger and arms.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount. Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet.

Connects valve to 301 round float. A brass rod float arm 1/4" x 2" with threads on each end.

Won't rust, resists rot & hold up to chemically active soil conditions. Corrugated design provides rigidity without bulk when back filled with earth. It will take abuse! Unaffected by ground movement due to freezing & thawing.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet.

#7 on breakdown. It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 1/4" Orifice on a VP124 Valve.

3/4" male to female hose used to hook up the water line to the waterer.

Each opening is 5" x 9", Superb supply line protection. Warmer water pushes through the ports and cooler water returns under the baffle. Water supply line enters through our unique tower.

Pride of the Farm Element for electric waterer units.

2" built in drain, stainless steel spring loaded attachment pins make cover removal & replacement easy, recessed, protected notches for secure anchoring, overflow port & dependable non-siphoning Durapride Valve.

Guaranteed for 1 year & SAFE IN PLASTIC. Constructed of Cast Aluminum for ultimate effiency & safety. Thermostatically controlled to only run when necessary. Good for us in containers up to 50 gallons and sold with many different manufactured automatic...

White styrofoam round disc float only.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

Use this valve assembly with the J303 with without heat.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...