Farm Equipment Livestock Waterers For Sale In Kansas

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

SPI 351/352 (old style) Rubber Drain Plug only .

Result = cleaner waterer inside & out. 5 year warranty. An Earth Tube is suggested with installation. It is FDA & HPB approved, food grade, recyclable plastic. The low profile design & fully hinged door provids animals better access to the capacity of...

There are four base screws that hold the top base to the bottom base. These are not included when ordering a base only.

SPI 351/352 New Generation Gasket.

SPI hatch cover for model 4x4 energy free waterer.

SPI white corrugated baffle for model 4x4 energy free waterer.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

White polyethylene disc float only.

SPI 3.75" Brass Short Float Stem only.

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

Screw that holds the float connect to the top of the float.

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

3/4" orfice only for the inside of a Franklin Valve.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

This black seat fits inside the plunger and shuts off the water through the orfice. Must be used with part #400267 Plunger Only.

SPI 90 degree elbow for all models.

With a 40 gallon capacity the waterer has a maximum usage of 200 Beef cows or 90 Dairy cows. The low profile design and fully hinged door provides animals better access to the water.

The new Value Series waterers from SPI are a "no tools required" waterer. Polyethylene Blue in color. This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights.

White styrofoam triangular disc float only.

The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

It also features a molded bolt foot and rounded corners for livestock safety. 5 year warranty. 21.75" W x 28" L x 16" H The brass valve and submersible heater are both enclosed by the valve hatch.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

3/4" male to female hose used to hook up the water line to the waterer.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

This piece holds the plunger and upper arm. No inside working parts included. The inside base of the Franklin Valve.