Farm Equipment Livestock Waterers For Sale In Jackson

This waterer has a MAX usage of 120 Beef, 50 Dairy or 135 Sheep. An Earth Tube is suggested with installation. And a MINI USE of 10 mature adult head. The D-Clip features no tools required to remove lid, no crossed/stripped thread failures, quick replacement...

SPI Drain Plug (#11) for all New Generation waterers.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

SPI 351 (old style) gasket only.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole. High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved...

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater. Do Not Immerse into liquid.

The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper arm and is also held by thumbscrew to the float arm.

Robert's 3/4" rubber cup ring that fits on the brass plunger.

Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom. The Megaflow is compact, robust and manufactured from non-corroding materials.

Arkfeld waterer element replacement. 600 watt x 240 volt heating element only.

No heat well needed; use an 8-12" tile; can be fitted on most existing pads. Seamless sidewall cannot leak. No pulleys & cable to foul & rust. Optional wing bolts are available for Grade A inspections.

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.

A brass rod float arm 1/4" x 8" with threads on each end. Connects valve to 301 round float.

A drain plug for Arkfeld waterers - 2" in size - Cork.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

250 Watt, 110 volt heater. Typical heating cost for one heating season only $10!

SPI white corrugated baffle for model 4x4 energy free waterer.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

The bottom has a cavity for warm climate installations only. Drinker is very easy to clean--no disassembly for cleaning required. Four recessed anchor notches for secure installation.

Arkfeld waterer element & thermostat replacement. 600 watt x 240 volt heating element with surface mount thermostat included.

Water supply line enters through our unique tower. It has 70 inches of drinking length and holds 70 gallons. The tower is foamed filled and the surrounding wall and valve cover are foam filled, Shutoff valve, 3/4" is standard, Through slopes to drain.

Drinker is very easy to clean--no disassembly for cleaning required. Large 2” External AND Internal (5.1 cm) clean out drains. The bottom has a cavity for warm climate installations only.

They are made for tanks which have the valve mounted above or below the water. The Topaz is compact, robust and manufactured from non-corroding materials. Features Has Detach for quick access to valve seal Mounts horizontally or vertically Made from corrosion...