Farm Equipment Livestock Waterers For Sale In Irvine

Arkfeld waterer element replacement. 600 watt x 240 volt heating element only.

A brass rod float arm 1/4" x 4" with threads on each end. Connect valve to 301 round float.

The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect the water line from freeze ups.

Stainless steel bolts & removable top afford easy access to plumbing. Unique baffles guard against icing & keep valve operating under severest conditions. Polar Max Drinkers operate like thermos all year long.

This white pin holds the upper arm to the top base.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. The Tru-Test Apex Xtraflo 3/4" or 1" Trough Valve is a full flow - diaphragm activated, armless, self-cleaning valve mechanism.

The Jug Basic Float Valve fits Models J101, 202, 303 & 404 with or without heat.

3 year warranty. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole. 40 1/2" x 28 1/4" x 14 1/4"

Inside repair kit for Topaz & Megaflow Valve.

Blue plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers.

Robert's 3/4" rubber plunger seat only.

22" W x 32" L x 26" H This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights. The new Value Series waterers from SPI are a "no tools required" waterer.

Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included). #11 on breakdown.

It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Has many uses around the home & farm. Operates with any 15 amp 120V electric heater or fan. Five controlled temperatures (one just right for you) & no installation required. Works automatically to ambient temperature.

Specs: It is 36" wide x 41" long x 19" tall. This unit is insulated with 3 1/2" of polyurethane insulation. The low profile design and fully hinged door provides animals better access to the water.

Stainless steel bolts & removable top afford easy access to plumbing. Unique baffles guard against icing & keep valve operating under severest conditions. Polar Max Drinkers operate like thermos all year long.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

Blue 10 3/4" replacement ball for the Mira Fount 3354S, M3370S, M3390, M3390E cattle waterers & 3360-10 hog waterer.

This drain plug fits Models 101, 202, 303 & 404 with or without heat.

1/2" orfice only for the inside of a Franklin Valve.

Megaflow Yellow Float Only.

This One Hole waterer has a 7 gallon tank capacity, waters up to 25 head of Dairy, 50 head of Beef & 75 head of sheep. Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally...

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. All edges have been rounded for safety & strength. Available in Forest Green in stock, other colors available for special order are Ash...

Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Foam filled-R value of 7.5 per inch. Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below.