Farm Equipment Livestock Waterers For Sale In Houston

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. The Tru-Test Apex Xtraflo 3/4" Trough Valve Long Tail is a full flow - diaphragm activated, armless, self-cleaning valve mechanism, with a longer valve...

3 year warranty. The tank also comes with a 1.25" drains installed. High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Corrugated design provides rigidity without bulk when back filled with earth. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. It will take abuse!

Connects valve to 301 round float. A brass rod float arm 1/4" x 6" with threads on each end.

3/4" orfice only for the inside of a Franklin Valve.

It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed by livestock. Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during freezing temperatures.

This piece is held by two thumbscrews not included in this part. 3" orange arm that fits between the lower arm and the float connect.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

Turns on at 36 degrees and turns off at 48 degrees. Surface mount thermostat used in galvanized waterers. Often used in Franklin & Arkfeld waterers.

Pride of the Farm Element for electric waterer units.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve.

(sold in pairs) SPI Rubber door hinges with screws for all of the New Generation energy free waterer.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!

SPI foamed 4x4 energy free waterer door only.

1000 watt x 240 volt heating element only. Arkfeld waterer element replacement.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Foam filled-R value of 7.5 per inch. Optional ground mount tube (Model HT10) for hookup to underground service connections and for outdoor installations.

B81 includes: Ref. B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker. 6, 7 and 12 (see parts list in pictures attached)

A round float for Arkfeld,SPI or Mira Fount waterers.

Connects valve to round float. A brass rod float arm 1/4" x 1" with threads on each end.

Do Not Immerse into liquid. 450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater.

Connects valve to 301 round float. A brass rod float arm 1/4" x 12" with threads on each end.

It has a 15" drinking height and four 9 1/2" x 9 1/2" door opening. Up to 50% more usable water capacity than the competition. The low profile design and fully hinged door provides animals better access to the water.

1000 Watt Immersible element used in the PC2 or PC10 waterer.