Farm Equipment Livestock Waterers For Sale In Hartford

Blue plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers.

Specs: It is 36" wide x 41" long x 19" tall. The patented door closure system has a set back seal and drain to help counteract the problems associated with door freeze up. This unit is insulated with 3 1/2" of polyurethane insulation.

This model features an adjustable short arm for customizing water level. Robert's Brass 3/4" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch...

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

Valve 36" Float Cord Only.

It is not adjustable for temperature. It will turn on the heating element at 45 degrees Fahrenheit and off at 60 degrees to provide reliable freeze protection with the waterers. The Model HE-CNTRL air sensing thermostat is a replacement for the original...

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

With quick release access clips for the hatch cover and access doors, installation and work is a lot quicker. The new Value Series waterers from SPI are a "no tools required" waterer.

Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom. Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water...

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch...

Often used in Franklin & Arkfeld waterers. Surface mount thermostat used in galvanized waterers. Turns on at 36 degrees and turns off at 48 degrees.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

Black rubber seat to fit inside the Mira Fount RED Plunger in a Mira Fount cattle waterer valve.

FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy servicing Flow stops when unscrewed for servicing Supplied with back-nut and seal washer Built in check valve Fully adjustable Float Angle Pressure range 0-150 PSI Low pressure...

Won't rust, resists rot & hold up to chemically active soil conditions. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of...

Won't rust, resists rot & hold up to chemically active soil conditions. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of...

This repair kit fits the Models 101, 202 & 404 with or without heat.

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

White polyethylene disc float only.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet. Mostly used on Franklin hog waterers.

Same description as J101 EXCEPT THIS UNIT HAS NO HEAT.

Great value & great features don't have to come in a boring, boxy profile. Dependable, non-siphoning Durapride valve. Model WP012 is loaded & is also one of the better looking drinkers ever to reach the market.

#12-3 on the breakdown. Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on the Polar Max waterers.

Highly recommended for ALL cold climate installations. The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect...