Farm Equipment Livestock Waterers For Sale In Glendale

Blue 10 3/4" replacement ball for the Mira Fount 3354S, M3370S, M3390, M3390E cattle waterers & 3360-10 hog waterer.

The Robert's 3/4" brass valve housing only.

Pride of the Farm Element for electric waterer units.

Blue Flap for WPM20 Cattle Waterer

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Mostly used on cattle waterers such as Franklin, SPI & MiraFount. Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet.

SPI foamed 4x4 energy free waterer door only.

A drain plug for Arkfeld waterers - 2" in size - Cork.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Rojo Float Valves are ideal for filling water drinking troughs for small numbers of animals. FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy servicing Flow stops when unscrewed for servicing Supplied with back-nut and seal...

3/4" male to female hose used to hook up the water line to the waterer.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

Constructed of Cast Aluminum for ultimate effiency & safety. This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm. Thermostatically controlled to only run when necessary.

Filter replacement for Topaz & Megaflow Valves.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

The JUG is the first waterer to be three-sided. After they locate the water source the level is re-adjusted to the normal drinking level. They don�t have to learn to lift flaps or push balls and floats are out of the way; they just use their natural...

Another plus is the VP2 is more compact than VP1 so it works very well in most of our waterer models - MH, MJ, MK, MC, WPO12, WPO17 as well as other energy-free drinkers. Greater tolerance to operation in dirty conditions; 4.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

Connects valve to 301 round float. A brass rod float arm 1/4" x 12" with threads on each end.

600 watt x 120 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

Robert's Brass cotter key that connects the long arm to the valve body.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve.